- On sale!
- Reduced price
- New

Xmotorstore Payments
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: 143.355.005
Brand: GRC
Or pump transmission to the pinion. Code: 143.355.005
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: TCM163
Brand: Tecnominimoto
TCM minimoto muffler for 50 cc engines. Tecnomoto minimoto muffler with non-decomposable manifold. Complete exhaust for minimoto with 50cc 2t water-cooled engine. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 143.025.002
Brand: POLINI
Segment diameter 36x1 mm for Polini minimoto 40cc air and h2o. Polini code: 143.025.002
Reference: 143.420.003
Brand: POLINI
Left front brake caliper lever with spring. Polini code: 143.420.003. Left front brake caliper lever with Polini spring for minibike.
Reference: 2005
Brand: STAMAS
Pair of Stamas brake caliper support studs.
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 143.070.003
Brand: POLINI
Reverso Polini crankcase couple. Polini Code: 143.070.003
Reference: 001002SP0080
Brand: DM
Front hub Dm in lightened ergal made in CNC, compatible with all Dm rims. Dm code: 001002SP0080
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: TCM167
Brand: Tecnominimoto
TCM junior minimoto exhaust for 15mm flanged engines. Tecnomoto junior minimoto exhaust for 15 mm flanges with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 15 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 143.270.014
Brand: POLINI
Intake manifold diameter 14 mm in rubber 4.2 hp Polini minimoto engine. Polini Code: 143.270.014
Reference: GHR 022.001
Brand: GHR
GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 001002A011C0
Brand: DM
Universal adhesive 10 mm mini bike saddle pad, compatible with: DM GRC STAMAS POLINI BLATA Dm code: 001002A011C0
Reference: GHR 001.002
Brand: GHR
Complete Ghr minimoto engine gp1 h2o 50 factory racing. The engine is supplied complete with muffler, silencer.
Reference: GHR 066.001 - 143.270.016
Brand: GHR
Rubber intake manifold Ghr diameter 21 mm. Specific manifold for minibikes with Ghr engine and phbg carburettor.
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.