Xmotorstore Payments
Or pump transmission to the pinion.
Code: 143.355.005
Or pump transmission to the pinion
Reference: 143.115.003
Brand: POLINI
Pinion pulley for or minimoto water pump transmission. Code: 143.115.003
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 143.800.070
Brand: POLINI
Rear fender minimoto 910 black Polini. Polini code: 143.800.070
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 048
Brand: DM
Key For fitting / removing caps Chassis CNC minimoto DM.
Reference: 1028
Brand: STAMAS
Pair of standard arms for swingarm 2012 21
Reference: IMH-02051
Brand: CS Racing
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange. Cs flange measurements: Center distance of cylinder attachment holes 47 mm Screw connection hole 6.5 mm Manifold connection 28 mm Base plate thickness 4 mm...
Reference: FD-O027-00
Brand: Formula
Formula O-ring for minimoto caliper. Formula minimoto and minicross braking system O-ring. The Formula O-ring is positioned under a conical screw in the caliper. Formula O-ring size: Outer diameter: 4 mm. Inner diameter: 2 mm. Thickness: 1 mm. Attention: the measurements are indicative, check for application and compatibility. Attention: 1 piece.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: 143.010.016
Brand: POLINI
Polini minimoto cylinder 143.010.016 Polini cylinder with air piston 5 ports d.36 COMPLETE WITH PISTON, BAND AND PIN. THE KIT DOES NOT INCLUDE THE HEAD.
Reference: tcm-014002
Brand: Tecnominimoto
Bzm Tcm exhaust manifold. Exhaust manifold for minibikes, compatible with Bzm, Grc, Tcm mufflers. Standard version, with standard curve.
Reference: 112.156.12
Brand: GRC
Grc front disc support d.145 floating. Grc Code: 112.156.12
Reference: 6011
Brand: STAMAS
Pair of threaded pull bushings for hull
Reference: TCM1212
Brand: DM
Carbon rear mudguard for Dm with aluminum swingarm from 2021 onwards. Carbon rear mudguard for Dm minimoto, with aluminum swingarm, from 2021 onwards. Real carbon of the highest quality, light and resistant.
Reference: 2020/28x2
Brand: STAMAS
Pair of 22 mm Stamas handlebars for 28 mm forks.
Reference: PISTONE GHR 50CC
Brand: GHR
Ghr piston for 50cc engines (0 00 A AA B BB)
Or pump transmission to the pinion.
Code: 143.355.005
