- On sale!
- Reduced price
- New

Xmotorstore Payments
Polini rear wheel 5 spokes 6.5 "steel gp2.
Polini Code: 143.730.017
Reference: M088024-T41
Brand: PMT TYRES
Pmt 110 / 55R6.5 "T41 Slick for minibike. For racing use only. type: 6.5 "minibike drawing type: slick hardness mixes: 56 shore A rubber width: 110mm rubber shoulder: 55 drawing usage: dry use of mix: racing recommended rim width: 66-72mm pressures: 1.4 - 1.9
Reference: T41.90+110
Brand: PMT TYRES
Tires PMT T41 90/65-6.5 + 110/55-6.5 COMPETITION TIRES, SUITABLE FOR USE ON DRY TRACK. HARDNESS MIXES: 56 SHORE (MEDIUM - SOFT) RECOMMENDED PRESSURE: FRONT 1.0 TO 1.4 BAR / REAR 1.4 TO 1.9 BAR RUBBER DESIGN: SLICK OPTIMUM TEMPERATURE ASPHALT: 20/30 GRADI IDEAL TEMPERATURE USE: 65 DEGREES
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: reg.for.dm
Brand: DM
Pair of adjusters for minibike swingarm DM up to 2007. Mechanical adjusters for minibike swingarm in mini and midi version.
Reference: 127
Brand: DM
Complete radiator bracket kit for all DM models
Reference: 143.730.014
Brand: POLINI
Air valve for front racing rim for Polini minimoto. Polini code: 143.730.014
Reference: 2036 7 18NC
Brand: PBR
M10 Z7 reinforced minimoto sprocket compatible with bell: Xracing CS Iame BZM GHR
Reference: 2012 I
Brand: STAMAS
Pair of Stamas factory mini fork tubes diameter 25 mm in stainless steel.
Reference: 143.800.067
Brand: POLINI
Polini 910 S blue minimoto front fender. Polini Code: 143.800.067
Reference: tcm201836
Brand: Tecnominimoto
TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.
Reference: 143.750.009
Brand: POLINI
Polini minimoto brake pads, for Polini 910. Code: 143.750.009
Reference: 213.0017
Brand: POLINI
Reed valve Polini 4.2 hp minimoto engine. Polini Code: 213.0017
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: 143.020.007
Brand: POLINI
Polini mini bike piston diameter 36 mm for 40cc engines. The racing version Polini minimoto piston differs from the standard for the position of the segment stop pin. Polini Code: 143.020.007 ATTENTION: SPECIFIC VERSION FOR 40 cc h2o.
Reference: GHR 501.001
Brand: GHR
Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Polini rear wheel 5 spokes 6.5 "steel gp2.
Polini Code: 143.730.017