Xmotorstore Payments
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 5006
Brand: STAMAS
Front hub Stamas factory including spacer and bearings.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 143.710.004
Brand: POLINI
Steel gp4 adjustable steering switch
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: 001002R08000
Brand: DM
hardware kit for frame and minimoto fairings Dm
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: 213.0017
Brand: POLINI
Reed valve Polini 4.2 hp minimoto engine. Polini Code: 213.0017
Reference: 144.270.002
Brand: POLINI
Removable aluminum bushing for minimoto manifold to switch from Dellorto phbg to sha 14 or 15 mm. Code: 144.270.002 Universal, to be inserted in the rubber manifold, transforming it into a connection for sha carburettors.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 143.760.007
Brand: POLINI
Polini mini handlebar 210 mm (stem 24mm) 143.760.007
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 143.002.004
Brand: POLINI
Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.
Reference: GHR 014.001
Brand: GHR
Ghr 40 / 50cc cylinder block gasket kit. The kit includes: 1 PC CAD 0.05 0.10 0.20 0.50
Rear axle factory Stamas
