Xmotorstore Payments
Rear hub Stamas standard / factory
including spacer and bearings
Reference: 5002
Brand: STAMAS
Stamas cnc racing wheel 60mm Stamas wheel weight 515g
Reference: 5006
Brand: STAMAS
Front hub Stamas factory including spacer and bearings.
Reference: 143.075.010
Brand: POLINI
Polini clutch side closed crankcase for reverse engine 143.075.010
Reference: GHR 503.001
Brand: GHR
Radial head Ghr 40cc air. Head for mini bike cylinder 40cc diameter 36mm Ghr air cooled.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: 143.555.001
Brand: POLINI
Polini minibike flywheel. The Polini flywheel dedicated to minibikes, compatible with selector coil and idm. Weight: 345 gr Polini Code: 143.555.001
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: 2021 X 2
Brand: STAMAS
Stamas clip-on handlebar clamps cnc separable for 58 mm diameter forks with screws, 2 pieces.
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: IMC-50200
Brand: CS Racing
Small end cage 14x18x10
Reference: 143.730.019
Brand: POLINI
Polini front black wheel 5 spokes 6.5 "steel gp3. Polini Code: 143.730.019
Reference: 143.630.007
Brand: POLINI
Engine support pin with nuts minimoto Polini 910 S RS. Polini code: 143.630.007 Upper engine support pin minimoto Polini, model 910 R RS.
Reference: 001002R006A0
Brand: DM
Pair of flywheel side footpeg support spacers. The pedal spacers are used to maintain the correct distance between the pedal support Dm and the starter cover.
Reference: GHR 042.001
Brand: GHR
Ghr bell casing in red ergal, compatible with Ghr, Bzm, Iame, Cs. Allows the use of a self-ventilated bell.
Rear hub Stamas standard / factory
including spacer and bearings
