Xmotorstore Payments
Polini minibike head diameter 36 racing model for water-cooled engines.
Polini Code: 143.015.020
Polini minibike head diameter 36 racing model for water-cooled engines.
Polini Code: 143.015.020
Reference: 143.080.001
Brand: POLINI
Standard polini minimoto crankshaft. Shaft compatible with Polini 6.2 and 4.2 Polini engine. Polini Code: 143.080.001
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: 9002
Brand: STAMAS
Pair of Stamas standard radiator support brackets.
Reference: 54210600
Brand: Tecnominimoto
Tcm corsa mini bike crankshaft 39.6 red shoulders. Crankshaft for 2t racing minibike. Compatible with engines: Ghr, Cs, Bzm, Polini, Quattrini, Sg, Or, Iame, Zocchi.
Reference: 143.355.003
Brand: POLINI
Or seal for Polini 6.5 "(3.53X145.65) rim. Polini Code: 143.355.003
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: Xmts.inox.40
Brand: XRACING
Stainless steel xmotorstore exhaust manifold, for Cs Iame 40cc engine. Made by hand in Italy, the union of the first choice stainless steel material and the craftsmanship make the collector performant for racing use and resistant to any extreme conditions. The heat resistance and the ability to quickly dispose of the exhaust gas make the collector...
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 143.120.001
Brand: POLINI
Polini primary transmission shaft for minibike reverse engine. Polini code: 143.120.001
Reference: 4014
Brand: STAMAS
Cnc support for rear brake caliper mechanical factory Stamas
Reference: 143.760.004
Brand: POLINI
Semi handlebar with Polini minimoto bracelet. Polini code: 143.760.004 it is possible to use the Polini half handlebar on both the right and left side.
Reference: 093
Brand: DM
New DM 2021 front fairing in reinforced resin. Minimoto fairing model Dm 2021, compatible with previous models. Dm Code: 093
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 143.275.003
Brand: POLINI
Polini 910 911 racing mini-bike exhaust manifold from 95 to 96. Polini code: 143.275.003
Reference: 112.230.10
Brand: GRC
Grc midi RR and MIX platform support. Support available in versions: Grc right pedal support 112.230.10 Left pedal support Grc 112.230.11
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
Reference: 2018
Brand: STAMAS
Torque support bracket front fender Stamas
Polini minibike head diameter 36 racing model for water-cooled engines.
Polini Code: 143.015.020
