Polini cylinder with piston d.36 3 reverso transfer 143.010.015

Reference: 001002R06100

Brand: DM

DM minimoto transparent windshield

DM transparent minibike fairing, compatible with original DM fairings. DM code: 001002R06100 Attention: The color may vary according to the production lot and the constructive choice of the manufacturer.

Reference: 001002A00300

Brand: DM

Steering bearings plus spacer and midi bushings

Minimoto Dm steering bearings plus spacer and midi bushings.

Reference: 143.305.010

Brand: POLINI

Set of screws and nuts for frame and fairings Polini minimoto 143.305.010

Set of screws and nuts for Polini minimoto frame and fairings. Polini code: 143.305.010 The Polini minimoto screw kit includes: Polini minimoto fairing screws 910. Polini minimoto frame screws 910. Set of screws for Polini minimoto model 910, generic. Attention generic kit for 910, 910 S, 910 RS, may not contain some variants.

Reference: GHR 032.002

Brand: GHR

Clutch plate Ghr G-Radius black

G-radius black Ghr minimoto clutch plate with 2 adjustable masses. The best clutch plate for a precise and quick setting of your clutch. Plate weight 130g compatible with Iame, Cs, Bzm, Polini, Ghr, Zocchi engine.

Reference: 143.630.015

Brand: POLINI

Complete front wheel axle 911 143.630.015

Front wheel pin with spacers for Polini 910/911 minimoto for mounting 6.5 "rims code 143.630.015

Reference: 143.705.008

Brand: POLINI

jaws for minimoto clutch Polini 143.705.008

Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...

Reference: 7012

Brand: STAMAS

External spacer side crown Stamas

Stamas crown side wheel spacer

Reference: TCM32

Brand: Tecnominimoto

Bell carter Tcm For Carter Orioli

Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 112.113.16

Brand: GRC

Rear wheel pin 10X180 Grc

Rear wheel pin 10X180 allen key midi rrz-3 Grc

Reference: GHR 071.024

Brand: GHR

Reed Ghr carbon braided 0.24 high tech

Reed Ghr carbon braided 0.24 high tech

Reference: 001002R03100

Brand: DM

Rapid gas throttle minimoto DM

Universal quick throttle control for minimoto, produced by Dm, compatible with: Stamas, Dm, Blata, Grc, Polini and others. Compatible with 21/22 mm handlebars. Knob length 115 mm. Total length of throttle control 145 mm. Code: 001002R03100.

Reference: 143.065.001

Brand: POLINI

Polini minibike engine seals (15x22x5) 143.065.001

Polini oil seals series for minimoto engine oil seals size: 15x22x5 mm. The 15x22x5 minimoto engine oil seals are indicated exclusively for Polini 4.2 and 6.2 engines. Polini Code: 143.065.001 Ean code: 8054705014857 External diameter 22 mm Internal diameter 15 mm Thickness 5 mm

Reference: 143.000.260

Brand: POLINI

Minibike Polini 910 hull Rs air 6,2 HP – ruote 6,5″ 143.000.260

Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...

Reference: 10001

Brand: DM

Minibike gas tank universal

Minimoto petrol tank complete with cap, universal tank for Italian minibikes. Fuel pipe connection: 6mm Length: 18 cm Width: 15 cm Height (with cap): 13 cm Weight: 185 g

Reference: Ariane-K2Re

Brand: Arianetech

Ariane K2Re electric minimoto

Ariane K2Re was designed in response to the models that are the reference among the current minibikes, but in an electric version. For this reason it is equipped with an electric unit with a maximum power of 6.5 kW (8.5 HP), adjustable in multiple parameters via a USB port that connects to a laptop to adapt to the needs of every rider, from the beginner...