- On sale!
- New

Xmotorstore Payments
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell.
Cs clutch models:
- HAMMER GT Low friction coefficient, allows greater slip without affecting performance
- HAMMER GP Medium-high friction coefficient
- HAMMER EPIC High Coefficient
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell.
Cs clutch models:
- HAMMER GT Low friction coefficient, allows greater slip without affecting performance
- HAMMER GP Medium-high friction coefficient
- HAMMER EPIC High Coefficient
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: 25HG-A
Brand: XRACING
Reinforced universal minimoto chain for racing use. The most used chain for Italian and non-Italian minimotos, in all minimoto championships in the world. Chain length: 158 links. Application: Dm minimoto chain, Stamas minimoto chain, Grc minimoto chain, Blata minimoto chain, Polini minimoto chain. Features of the xmotorstore reinforced minimoto chain:...
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: GHR 020.001
Brand: GHR
Pair of oil seals for minimoto GHR engines. Pair of oil seals for minimoto high smoothness engines GHR, for minimoto engines. The minimoto GHR oil seals are compatible with BZM, CS, IAME, POLINI engines and others. Oil seal measurements: 15x24x5 mm.
Reference: 1010
Brand: STAMAS
Chain tensioner factory Stamas. ATTENTION: Color may change without notice.
Reference: GHR 559.010
Brand: GHR
Ghr expansion for 40cc air motor (10 12 15 and free). Available to choose between: Ghr expansion for 40cc flange 10 air motor. Ghr expansion for 40cc flange 12 air motor. Ghr expansion for 40cc flange 15 air motor. Ghr expansion for 40cc flanged air motor.
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Reference: 143.764.001
Brand: POLINI
Polini minimoto support stand. Polini code: 143.764.001. Stand for Polini 910 minibike.
Reference: GHR 016.001
Brand: GHR
GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...
Reference: 001002R04500
Brand: DM
Soft front brake line with sheath for Dm minimto. DM Code: 001002R04500
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: GHR 024.001
Brand: GHR
Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.
Reference: 112.010.75
Brand: GRC
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Reference: IMH-04000
Brand: CS Racing
Cs racing muffler for 50cc racing minimoto. The Cs racing expansion improves performance at high and low revs.
Reference: CSR.MAS.0010
Brand: CS Racing
Clutch masses Cs racing minimoto. Replacement masses for minimoto clutch, cs racing. Features: Kevlar base. Use: junior - senior. To be used with 80 mm bell.
Reference: 001002A01200
Brand: DM
Adhesive set for minibike fairing Dm. Minibike original stickers kit Dm.
Reference: 057
Brand: DM
Dm red crown and disc protectors. The kit includes crown protection and disc protection for Dm minimoto.
Reference: 2036 7 18NC
Brand: PBR
M10 Z7 reinforced minimoto sprocket compatible with bell: Xracing CS Iame BZM GHR
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell.
Cs clutch models:
- HAMMER GT Low friction coefficient, allows greater slip without affecting performance
- HAMMER GP Medium-high friction coefficient
- HAMMER EPIC High Coefficient