Xmotorstore Payments
Reverse clutch bell roller cage. Polini Code: 143.195.003
External diameter 17mm - internal 14mm
Reverse clutch bell roller cage. Polini Code: 143.195.003
External diameter 17mm - internal 14mm
Reference: 143.270.011
Brand: POLINI
Minimoto rubber intake manifold, straight steel model. Polini Code: 143.270.011
Reference: GHR 016.001
Brand: GHR
GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...
Reference: 001002R006B0
Brand: DM
Pair of Dm spacers for air head. Spacers for air motor on frame Dm. Dm minimoto spacers measures: Long side: 51 mm Short side: 30.5mm Hole: 8 mm Outside diameter: 16 mm
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Reference: 143.730.002
Brand: POLINI
Complete 5 "rear Polini rim. Polini Code: 143.730.002
Reference: 2016/28
Brand: STAMAS
Cnc support for factory hydraulic front brake caliper plus screws for 28 mm stems
Reference: 2000201
Brand: Tecnominimoto
Replacement bit for minimoto chain breaker. Bit for Tcm, Grc and Zocchi chain breaker. The bit of the minimoto chain breaker is the essential part for using the opening function.
Reference: GHR 003.001
Brand: GHR
Ghr h2o increased head cover black. New oversized Ghr head machined from solid for 40 and 50 cc liquid-cooled engines.
Reference: 143.015.011
Brand: POLINI
Polini h2o minibike head with long thread Code: 143.015.011
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: 7004
Brand: STAMAS
Stamas minimoto internal steering head spacer
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reverse clutch bell roller cage. Polini Code: 143.195.003
External diameter 17mm - internal 14mm
