- On sale!
- New

Xmotorstore Payments
Polini 910 s minimoto fairing right plus left, compatible with all polini 910.
Polini Code: 143.801.047
Reference: 143.801.043
Brand: POLINI
Polini 910 minimoto fairing glass. The universal Polini 910 minimoto fairing. Polini Code: 143.801.043
Reference: 143.762.013
Brand: POLINI
Seat for fairing 910 s / gp3 (with biadhesive) 143.762.013
Reference: 143.803.015
Brand: POLINI
Polini 910 S RS minimoto tail. The tail for 910 is compatible with all models of Polini 910 S and RS. The blue tail for 910 is molded in blue plastic material. Polini Code: 143.803.015
Reference: 143.802.017
Brand: POLINI
Minibike tank fairing Polini 910 rs 910 / 910 / 910 s, rs. Code 143.802.017
Reference: 143.800.067
Brand: POLINI
Polini 910 S blue minimoto front fender. Polini Code: 143.800.067
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: pinz-ass-post-form
Brand: Formula
Formula axial rear caliper. Rear hydraulic caliper for minimoto, axial attachment. Rear brake caliper for Blata and other minimoto, with axial attachment. The caliper kit includes the pads. Attention: Made to order, delivery 4 weeks.
Reference: 143.630.013
Brand: POLINI
Front brake caliper support studs 911 911 front brake caliper support studs for minimoto Code 143.630.013 Ean code: 8054705020278
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub internal spacer
Reference: M099341-V00
Brand: PMT TYRES
Tubeless valve for wheels 6.5" compatible with minimoto wheels Dm, Stamas, Grc.
Reference: 2035 7 18NC
Brand: PBR
Reinforced M8 Z7 minimoto sprocket. Pinion for Polini minimoto.
Reference: 143.145.005
Brand: POLINI
Clutch bell reverse engine minimoto Polini 143.145.005
Reference: 143.000.261
Brand: POLINI
Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: TST.001
Brand: CS Racing
Engine head support bracket Cs Bzm. Universal support for mini bike head.
Reference: PISTONE IAME 40CC
Brand: CS Racing
Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 001002R04800
Brand: DM
Minibike brake wire 100 cm. DM Code: 001002R04800
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: 143.310.002
Brand: POLINI
Reverse engine ignition nut with starter coupling. Replacement for Polini reverso minimoto. Polini Code: 143.310.002
Reference: 0H5-5320-00 (USB CABLE COMP.)
Brand: Arianetech
USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.
Reference: GHR 058.001
Brand: GHR
Ghr exhaust manifold for 50cc engine
Polini 910 s minimoto fairing right plus left, compatible with all polini 910.
Polini Code: 143.801.047