Red aluminium paramanry cover

Reference: 143.760.004

Brand: POLINI

Minimoto Polini semi handle with bracelet 143.760.004

Semi handlebar with Polini minimoto bracelet. Polini code: 143.760.004 it is possible to use the Polini half handlebar on both the right and left side.

Reference: 044

Brand: DM

Swingarm Dm 2024 wheelbase 272 mm

Minimoto swingarm Dm 2024 center distance 272 mm. The new Dm 2024 swingarm has been reinforced and improved, allowing a better ride and a longer life even in conditions of maximum stress. The mini bike will be more responsive and stable. Dm code: 044

Reference: 143.415.006

Brand: POLINI

Fork plates Polini 910 RS 143.415.006

Polini 910 RS minimoto fork plates. Fork plates 2WB for straight steerer. Polini Code: 143.415.006 Polini minimoto fork plates in aluminum. Color: gray Total width: 170 mm. Hole diameter for stem: 24 mm. Steering stem pin diameter: 10 mm. Fork stem center distance: 134 mm. The kit includes the necessary screws for assembly.

Reference: 123

Brand: DM

Central footboards Supports Dm (2pz.)

Central footpeg supports minimoto Dm c.n.c. 2 pieces in polished aluminum color. Dm Code: 123

Reference: TCM32

Brand: Tecnominimoto

Bell carter Tcm For Carter Orioli

Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.

Reference: 143.145.002

Brand: POLINI

Bell minibike 80 mm Polini

Clutch bell for Polini minibike internal diameter 80,3 mm, for pinion M8. The bell is only compatible with Polini minibikes, it is recommended to combine it with the original Polini clutch. Polini Code: 143.145.002

Reference: 143.000.251

Brand: POLINI

Minimoto Polini 910 Rs air fairing 4.2 HP wheels 6.5 inches white 143.000.251

Minimoto Polini 910 Rs hull with 4.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.251. Minimoto Polini 910 S hull 4.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...

Reference: GHR 037.001

Brand: GHR

Red clutch springs 2,5 mm Ghr

Red clutch springs 2,5 mm Ghr

Reference: 3009

Brand: STAMAS

Couple lever brake Stamas

Pair of Stamas brake levers, for mechanical cable brakes. The Stamas brake levers are adjustable, the distance of the lever from the knob is adjustable by means of a special screw. Compatible with 22mm half handlebars.

Reference: FM10141-10

Brand: Formula

Radial caliper Formula minimoto FM10141-10

Universal front or rear radial brake caliper Formula for minimoto and minicross. Formula Code: FM10141-10 Attention: The color of the caliper may vary depending on the production batch.

Reference: IMA-10551

Brand: CS Racing

Cylinder insert Cs flanged (10-12-15- loose)

Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.

Reference: 12002

Brand: STAMAS

Stamas minibike high stand

Stamas minibike high stand. Work stand for Stamas mini and midi mini bikes.

Reference: 6008/12

Brand: STAMAS

Stamas rear fender sr r factory

Stamas rear fender sr r factory. Code: 6008/12

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 143.085.001

Brand: POLINI

Complete connecting rod for polini crankshaft 143.085.001

Complete connecting rod for polini minimoto crankshaft, compatible with racing and standard shaft. The kit does not include the piston roller cage. 143.085.001

Reference: 143.750.020

Brand: POLINI

Polini GP2 130mm rear brake disc 143.750.020

Polini GP2 130mm mini bike rear brake disc. Polini Code: 143.750.020. Brake disc for minimum gp2 Polini 4 holes. Disc diameter: 130mm Fixing screw hole size: 5mm Distance between fixing holes: 60mm