Xmotorstore Payments
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike.
DM code: 001002R07300
Attention: does not include the nut.
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike.
DM code: 001002R07300
Attention: does not include the nut.
Reference: 10001
Brand: DM
Minimoto petrol tank complete with cap, universal tank for Italian minibikes. Fuel pipe connection: 6mm Length: 18 cm Width: 15 cm Height (with cap): 13 cm Weight: 185 g
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 121680060
Brand: XRACING
Quick release fuel hose connector (6mm / 8mm). The quick release for petrol pipe allows you to release the petrol pipe in 2 parts, blocking the flow of fuel.
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 001002R061A0
Brand: DM
Small screen for DM black color, compatible with original Dm fairings. DM Code: 001002R061A0
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: FM10192-40
Brand: Formula
Formula minibike rear braided brake hose M8 - M6. Formula code: FM10192-40 Formula hydraulic rear brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.
Reference: 001002A00300
Brand: DM
Minimoto Dm steering bearings plus spacer and midi bushings.
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: parafango ant carb DM
Brand: DM
DM Minibike mudguard in carbon, unique design, durable and extremely light. The fender for DM in carbon is compatible with the original attacks, no modification is required. Weight: 56 grams
Reference: 143.065.002
Brand: POLINI
Steering damper oil seals set Gp2. Series of oil seals for minimoto.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 143.630.013
Brand: POLINI
Front brake caliper support studs 911 911 front brake caliper support studs for minimoto Code 143.630.013 Ean code: 8054705020278
Reference: 091
Brand: DM
Hull quick release screw replacement. Dm Code: 091
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Reference: 9001
Brand: STAMAS
Universal radiator for minimoto, standard curved version. Radiator weight 535 grams. Hose connection 12 mm.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike.
DM code: 001002R07300
Attention: does not include the nut.
