- On sale!
- New

Xmotorstore Payments
CS muffler for flanged motors to be chosen from:
Muffler cs flange 10
Muffler cs flange 12
Muffler cs flange 15
(ATTENTION: CYLINDER BUSH EXCLUDED)
CS muffler for flanged motors to be chosen from:
Muffler cs flange 10
Muffler cs flange 12
Muffler cs flange 15
(ATTENTION: CYLINDER BUSH EXCLUDED)
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: SCR.0287
Brand: CS Racing
Cs exhaust curve for flanged motors, standard version. Available: Cs exhaust curve for flange 10 motor. Cs exhaust curve for flange 12 motor. Cs exhaust curve for 15 flange motor. Cs exhaust curve for flanged engine.
Reference: IMH-02051
Brand: CS Racing
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange. Cs flange measurements: Center distance of cylinder attachment holes 47 mm Screw connection hole 6.5 mm Manifold connection 28 mm Base plate thickness 4 mm...
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 143.010.015
Brand: POLINI
Polini cylinder with water piston d.36 3 reverse transfers. Polini code: 143.010.015
Reference: 074
Brand: DM
Replacement Quick Coupling Front Fairing
Reference: 112.238.21
Brand: GRC
Upper engine pin 8x160 midi rrz-3 Grc
Reference: 4013
Brand: STAMAS
Bracket for steel brake caliper Stamas
Reference: 2005
Brand: STAMAS
Pair of Stamas brake caliper support studs.
Reference: 143.355.001
Brand: POLINI
Or water pump transmission (142.5x3.53 mm). Polini code: 143.355.001. Or water pump transmission for minimoto.
Reference: 112.173.00
Brand: GRC
Pair of aluminum minimoto levers complete with register
Reference: 112.480.00
Brand: GRC
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition. Grc Code: 112.480.00
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: FM40028-20
Brand: Formula
Formula minimoto minicross brake lever. Universal right or left. Lever weight 40g, Formula code: FM40028-20
Reference: 143.600.001
Brand: POLINI
High voltage Polini minimoto coil, suitable for 4.2 and 6.2 Polini engines. Polini Code: 143.600.001
Reference: SCR.0294
Brand: CS Racing
Minimoto muffler springs Cs. Cs racing exhaust springs for minibikes, these springs are to be applied between bend and expansion, and based on the type of silencer they are also adaptable between expansion and silencer. Total spring length 72 mm. Unloaded spring length (L0) 68 mm. Spring length without eyelet (Lk) 40 mm. External diameter of the coils...
Reference: Kit.rev.6,2
Brand: POLINI
Polini 6.2 hp engine overhaul kit. includes: Banco racing c4 bearings. Kit gaskets complete 6.2 hp. Segment 40 or 50cc. Roller cage.
Reference: 001002R014A0
Brand: DM
Pair of DM minimoto front wheel spacers. DM Code: 001002R014A0
Reference: 045A
Brand: DM
Throttle cable with long sheath for pocket bikes with phbg carburettor, this new version of longer throttle wire and sheath allow you to work on the carburettor, simply by extracting it from the intake manifold and positioning it outside the frame, without having to remove the throttle cable. Sheath length 100cm. Gas wire length 116.5 cm.
CS muffler for flanged motors to be chosen from:
Muffler cs flange 10
Muffler cs flange 12
Muffler cs flange 15
(ATTENTION: CYLINDER BUSH EXCLUDED)