Xmotorstore Payments
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: KT0.0030
Brand: CS Racing
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 143.635.035
Brand: POLINI
Polini 910 RS minibike stickers, original Polini stickers kit for 910 minibikes. Polini Code: 143.635.035
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler. Total spring length 35 mm. Unloaded spring length (L0) 32 mm. Spring length without eyelet (Lk) 17 mm. External diameter of the coils (De)...
Reference: GHR 067.015
Brand: GHR
15mm Ghr minimoto reed valve pack. The aluminum Ghr reed valve pack is compatible with Iame, Cs, Ghr, Bzm, Polini (6.2). To be used for racing engines.
Reference: 090
Brand: DM
DM minimoto fairing quick releases, 2 pieces. Quick release kit for Dm minimoto fairings, the kit includes 2 plates, 2 quick screws, 2 rivets. This kit is compatible with Dm minimoto frames from 2016 onwards. Dm code: 090
Reference: 143.730.017
Brand: POLINI
Polini rear wheel 5 spokes 6.5 "steel gp2. Polini Code: 143.730.017
Reference: Kit.rev.6,2
Brand: POLINI
Polini 6.2 hp engine overhaul kit. includes: Banco racing c4 bearings. Kit gaskets complete 6.2 hp. Segment 40 or 50cc. Roller cage.
Reference: GHR 071.026
Brand: GHR
Reed Ghr carbon braided 0.26 high tech
Reference: 111
Brand: DM
Stainless steel chain puller to save minimoto swingarm dm from 2012, 2 pieces
Reference: 003
Brand: DM
Fairing Chassis Model. X Shock absorber Fg
Reference: 076
Brand: DM
Handlebar vibration dampers Dm red. The Dm mini bike rockers are used to stabilize and protect the handlebar from impacts.
Reference: 143.270.011
Brand: POLINI
Minimoto rubber intake manifold, straight steel model. Polini Code: 143.270.011
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
