Xmotorstore Payments
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: KT0.0030
Brand: CS Racing
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: 049
Brand: DM
Swingarm caps DM in Red CNC, 2 pieces. Weight: 56g
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: Supp-DM-formula-assiale-ant
Brand: Tecnominimoto
Formula axial front calliper support for Dm. Support for mounting Formula hydraulic front caliper on mini bikes Dm, for 25 and 28 mm stems.
Reference: 001002A02500
Brand: DM
Minibike front fender Dm. New 2024 version in "fiber" composite material. The new DM minibike mudguard is also compatible with previous versions, with 25 and 28 mm fork tubes.
Reference: TCM32
Brand: Tecnominimoto
Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.
Reference: 143.750.003
Brand: POLINI
Rear brake disc d.122 Polini Polini code : 143.750.003 Ean Code: 8054705021879
Reference: ia3994
Brand: Tecnominimoto
Round head piston complete with segment and pin. Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat. Non-deformable due to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Crowned roof reinforced to withstand the stresses...
Reference: CMP.066
Brand: CS Racing
Cs racing minibike bell, universal with M10 pinion thread. Available in size : 81mm 80mm 79mm 78mm
Reference: 010.0743
Brand: POLINI
Minimoto starter handle, universal for minibikes with pull starter with rope. Polini Code: 010.0743
Reference: GHR 033.001
Brand: GHR
Plate pins for clutch Ghr 2 masses
Reference: 2006
Brand: STAMAS
Pair of 24 mm Stamas standard half handlebars
Reference: 001002R085A0
Brand: DM
Curved racing DM mini-bike radiator Top width 21 cm Bottom width 17 cm Thickness 5 cm
Reference: 1009
Brand: STAMAS
Standard Stamas chain tensioner couple
Reference: tcmjunior1
Brand: Tecnominimoto
TCM junior minimoto exhaust for flanged. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
