Xmotorstore Payments
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 053
Brand: DM
Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.
Reference: 2011
Brand: STAMAS
Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.
Reference: Deviaflussi-Cs
Brand: CS Racing
Iame CS flow diverter, available with the variants: oval / round diameter 15 or 21.
Reference: IMB-41100
Brand: CS Racing
Intake manifold insert diameter 15
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: FM10141-10
Brand: Formula
Universal front or rear radial brake caliper Formula for minimoto and minicross. Formula Code: FM10141-10 Attention: The color of the caliper may vary depending on the production batch.
Reference: IMB-20200
Brand: CS Racing
Scratch bank engine 25x35 thickness 0.10 Iame (10 pieces)
Reference: PT0.0021
Brand: CS Racing
CS racing clutch plate, available in various weights of your choice. Plate for 2 masses clutch, compatible with Polini clutch and bzm clutch.
Reference: FD40071-10
Brand: Formula
Formula tube fixing o-ring kit Code: FD40071-10
Reference: 203.0044
Brand: POLINI
Polini CIV minibike air filter. Air filter for minibikes, version used in the Italian minibike championship, in the junior A category. Filter used on the Polini 6.2 hp flange 12 engine. Polini minibike civ filter. Carburettor connection diameter: 36 mm Air filter inclination: 30 degrees.
Reference: 001002A011C0
Brand: DM
Universal adhesive 10 mm mini bike saddle pad, compatible with: DM GRC STAMAS POLINI BLATA Dm code: 001002A011C0
Reference: 143.802.019
Brand: POLINI
Polini 910 mini biketank cover black color. Polini Code: 143.802.019
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
