- On sale!
- New
Reference: MLL.0041
Brand: CS Racing
Blue clutch spring 2,3mm (JUNIOR)
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Xmotorstore Payments
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: SKU 2550
Brand: Tecnominimoto
Tcm minibike engine crankcase for Bzm Or Tcm. Cast minibike engine crankcase for 2-stroke engines, compatible with: Bzm, Orioli, Tcm.
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: IMB-20200
Brand: CS Racing
Scratch bank engine 25x35 thickness 0.10 Iame (10 pieces)
Reference: 143.705.009
Brand: POLINI
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009. Complete spring tie rods for 2-mass clutch for pocket bikes.
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 2011
Brand: STAMAS
Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: 143.763.004
Brand: POLINI
Pair of minimoto footpegs with advancement. For minibikes: Dm, Grc, Stamas, Blata, Polini.
Reference: 143.065.001
Brand: POLINI
Polini oil seals series for minimoto engine oil seals size: 15x22x5 mm. The 15x22x5 minimoto engine oil seals are indicated exclusively for Polini 4.2 and 6.2 engines. Polini Code: 143.065.001 Ean code: 8054705014857 External diameter 22 mm Internal diameter 15 mm Thickness 5 mm
Reference: 001002R006A0
Brand: DM
Pair of flywheel side footpeg support spacers. The pedal spacers are used to maintain the correct distance between the pedal support Dm and the starter cover.
Reference: 2023
Brand: STAMAS
Pair of aluminum spacers for 25 mm fork
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: 2024
Brand: STAMAS
Stamas front end kit diameter 28 Composed of: stainless steel fork legs d. 28 dumbbell seeds d. 28 detachable semi-handlebar collars fork plates front hub