Xmotorstore Payments
Ghr dome for head cover
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: GHR 003.001
Brand: GHR
Ghr h2o increased head cover black. New oversized Ghr head machined from solid for 40 and 50 cc liquid-cooled engines.
Reference: 9001
Brand: STAMAS
Universal radiator for minimoto, standard curved version. Radiator weight 535 grams. Hose connection 12 mm.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: IMH-04000-40-C
Brand: CS Racing
Cs muffler for h2o engine (40cc or 50cc).
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: 143.630.015
Brand: POLINI
Front wheel pin with spacers for Polini 910/911 minimoto for mounting 6.5 "rims code 143.630.015
Reference: 112.238.21
Brand: GRC
Upper engine pin 8x160 midi rrz-3 Grc
Reference: 143.115.003
Brand: POLINI
Pinion pulley for or minimoto water pump transmission. Code: 143.115.003
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: FD-O027-00
Brand: Formula
Formula O-ring for minimoto caliper. Formula minimoto and minicross braking system O-ring. The Formula O-ring is positioned under a conical screw in the caliper. Formula O-ring size: Outer diameter: 4 mm. Inner diameter: 2 mm. Thickness: 1 mm. Attention: the measurements are indicative, check for application and compatibility. Attention: 1 piece.
Reference: GHR 023.001
Brand: GHR
Ghr factory crankshaft stroke 39.6 with cnc connecting rod. Ghr minibike crankshaft, compatible with almost all Italian minibike engines. Average crankshaft weight Ghr: 735 g.
Reference: insert.dm.man
Brand: DM
Inserts for DM minimoto half handlebars, available for 25 or 28 fork diameter.
Reference: 112.010.41
Brand: XRACING
Replacement slider cable for minimoto starter. Replacement slider cable for pull start minimoto, compatible with: Bzm minimoto starter. Cs minimoto starter. Polini minimoto starter. Ghr minimoto starter.
Reference: 129
Brand: DM
New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm
Reference: MAS.HM2
Brand: CS Racing
Pair of weights for two-mass clutches GP HAMMER 2.0 New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 34 9806
Brand: Malossi
Malossi piston d.36 2t for mini bikes. All Malossi cylinders in cast iron and aluminum are divided into selection classes. They range from selection 0 (smallest piston) to selection D (largest piston). Each selection step is equivalent to an increase of 0.01 mm. When placing your order, carefully check your selection as shown in the example below:...
Reference: Campana-tornado-tcm
Brand: Tecnominimoto
Tornado minibike bell. Bell for minimoto, tornado model, with m.8 thread, available in diameter: 79, 80, 81, 84, 86 mm. Spheroidal cast iron bell. It can be mounted on all types of mini-bike crankcases. Adjustable from the outside without disassembling the casing. Can be used with all types of clutch. Extremely performing with TCM clutches. Its shape...
Ghr dome for head cover
Dome size: 40g
