- On sale!
- New
Reference: GHR 002.001
Brand: GHR
Ghr 50cc h2o cylinder
Ghr cylinder diameter 40 mm, displacement 50cc h2o. Cylinder Ghr 50cc h2o 2-stroke engine.
Xmotorstore Payments
Reference: GHR 002.001
Brand: GHR
Ghr cylinder diameter 40 mm, displacement 50cc h2o. Cylinder Ghr 50cc h2o 2-stroke engine.
Reference: 143.065.001
Brand: POLINI
Polini oil seals series for minimoto engine oil seals size: 15x22x5 mm. The 15x22x5 minimoto engine oil seals are indicated exclusively for Polini 4.2 and 6.2 engines. Polini Code: 143.065.001 Ean code: 8054705014857 External diameter 22 mm Internal diameter 15 mm Thickness 5 mm
Reference: 143.015.020
Brand: POLINI
Polini minibike head diameter 36 racing model for water-cooled engines. Polini Code: 143.015.020
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 001001002000
Brand: DM
New DM minimoto frame kit midi 2023 full chrome 4 version. Compatible with Dm Junior and Senior minimoto bikes. Reduced weight of 700 grams from the previous version. Tubular top 20mm bottom 18mm. DM Code: 001001002000
Reference: 2019/28
Brand: STAMAS
Semi Handlebar racing d.28 with bracket decomposable cnc more screws Stamas
Reference: GHR 003.001
Brand: GHR
Ghr h2o increased head cover black. New oversized Ghr head machined from solid for 40 and 50 cc liquid-cooled engines.
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: 143.705.012
Brand: POLINI
Polini reverso clutch shoe set. The Polini reverso minimoto clutch pads are specific and unique for the reverse engine. Polini Code: 143.705.012
Reference: 001002R017F0
Brand: DM
Aluminum rear mechanical brake caliper support kit for minimoto Dm. Code: 001002R017F0
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 143.800.067
Brand: POLINI
Polini 910 S blue minimoto front fender. Polini Code: 143.800.067
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 001002R02600
Brand: DM
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm. Spacer size 117.5 mm.
Reference: 143.002.004
Brand: POLINI
Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.
Reference: 143.705.008
Brand: POLINI
Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...