Xmotorstore Payments
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 001002SP095D
Brand: DM
Rear wheel pin for aluminum swingarm Dm
Reference: NSK 6003V
Brand: XRACING
NSK racing high speed minimoto bell bearing, this bearing allows the bell to slide at very high speed without altering its stability, improving the performance of the clutch. Compatible with bell casings Cs, Iame, Bzm, Polini, Ghr, Xracing and others. Code: NSK 6003V Inner diameter: 17 mm External diameter: 35 mm Thickness: 10 mm
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: 2021/28
Brand: STAMAS
Decomposable cnc collar 28 mm diameter Stamas
Reference: 143.764.001
Brand: POLINI
Polini minimoto support stand. Polini code: 143.764.001. Stand for Polini 910 minibike.
Reference: GM.3MS
Brand: CS Racing
Clutch spring guide 3 masses cs racing iame. Spring guide for universal 3-mass clutch, compatible with 3-mass plate BZM and CS racing.
Reference: 112.010.75
Brand: GRC
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Reference: FD-O027-00
Brand: Formula
Formula O-ring for minimoto caliper. Formula minimoto and minicross braking system O-ring. The Formula O-ring is positioned under a conical screw in the caliper. Formula O-ring size: Outer diameter: 4 mm. Inner diameter: 2 mm. Thickness: 1 mm. Attention: the measurements are indicative, check for application and compatibility. Attention: 1 piece.
Reference: BZM-018004
Brand: BZM
Segment Bzm racing 40 mm 50 cc. Bzm minimoto piston ring diameter 40 mm, for 50 cc 2t engines. Segment NOT chromed.
Reference: 001002R017B0
Brand: DM
Minimoto DM front mechanical brake caliper support columns Long column: 33 mm Short column: 21 mm Smooth side stud diameter: 7 mm Stud thread diameter: 10 mm Code: R017BO
Reference: TCM/BZM 50 H20
Brand: Tecnominimoto
Minibike engine gasket kit BZM, TCM 50cc H2o. Complete kit of gaskets for 50cc minimoto Bzm and Tecnomoto engines.
Reference: 143.355.006
Brand: POLINI
Polini reverse water pump transmission belt. Transmission belt for Polini reverso engine water pump. The original Polini belt for the minimoto water pump. Code: 143.355.006
Reference: 112.191.25
Brand: GRC
Red aluminum cap for 25 mm diameter forks. Grc Code: 112.191.25
Reference: 102
Brand: DM
Trim variation kit Dm 4 holes, in aluminum. Dm Code: 102
Reference: 112.409.15
Brand: GRC
Special screw for mechanical caliper pads support (10 pieces)
Reference: 143.002.004
Brand: POLINI
Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.
Reference: GHR 039.001
Brand: GHR
Ghr mass guide for minimoto clutches
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: 6006
Brand: STAMAS
Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
