Xmotorstore Payments
Stamas rear water pump support bracket
Reference: 9001
Brand: STAMAS
Universal radiator for minimoto, standard curved version. Radiator weight 535 grams. Hose connection 12 mm.
Reference: 9004
Brand: STAMAS
Stamas racing oversized mini-bike radiator. The oversized radiator allows the correct temperature of the coolant to be maintained even in racing conditions.
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 001002R085A0
Brand: DM
Curved racing DM mini-bike radiator Top width 21 cm Bottom width 17 cm Thickness 5 cm
Reference: TCM10
Brand: Tecnominimoto
TCM minibike crankshaft overhaul kit. Kit consisting of connecting rod cage, connecting rod shaft, and washers. This kit is compatible for overhauling the crankshaft, tcm, bzm, iame, ghr, polini, or, zocchi, beast.
Reference: 143.710.004
Brand: POLINI
Steel gp4 adjustable steering switch
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: 143.801.030
Brand: POLINI
Polini 911 front fairing white, includes right and left side. Polini code: 143.801.030
Reference: TCM6035D.10
Brand: Tecnominimoto
Flat head minibike cylinder kit 36mm 40cc 5 transfers. Compatible kit for engines: Thermal unit for Tcm crankcase. Thermal unit for Bzm crankcase. Thermal unit for engine crankcase Or. For 40cc air-cooled pocket bikes, with chromed barrel, the shape of the exhaust allows you to vary the exhaust reductions using the appropriate inserts, adapting this...
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 143.415.002
Brand: POLINI
Supports for Polini 910 RS minibike footpegs. Polini code: 143.415.002
Reference: 143.801.049
Brand: POLINI
Polini 910 minibike fairing black 143.801.049. Polini 910 s right and left minibike fairing, in glossy black colour, compatible with all Polini 910, S, Rs. Polini code: 143.801.049 Left and right pair.
Reference: 8007
Brand: STAMAS
Pair of pins for fixing the head of the Stamas mini / midi swingarm motor
Reference: 143.565.001
Brand: POLINI
Polini 910 minimoto swingarm chain guide shoe. Polini code: 143.565.001
Reference: 143.803.021
Brand: POLINI
Rear tail 910 white 143.803.021
Reference: 143.800.066
Brand: DM
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099. Dm code: 098
Reference: 0H5-5320-00 (USB CABLE COMP.)
Brand: Arianetech
USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.
Reference: 143.705.009
Brand: POLINI
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009. Complete spring tie rods for 2-mass clutch for pocket bikes.
Reference: 045A
Brand: DM
Throttle cable with long sheath for pocket bikes with phbg carburettor, this new version of longer throttle wire and sheath allow you to work on the carburettor, simply by extracting it from the intake manifold and positioning it outside the frame, without having to remove the throttle cable. Sheath length 100cm. Gas wire length 116.5 cm.
Stamas rear water pump support bracket
