Xmotorstore Payments
Brake wire clamp Grc
Reference: 2021 X 2
Brand: STAMAS
Stamas clip-on handlebar clamps cnc separable for 58 mm diameter forks with screws, 2 pieces.
Reference: 143.015.017
Brand: POLINI
Polini h2o minibike head d.40 long thread. Polini Code: 143.015.017
Reference: FRZ.HM3
Brand: CS Racing
Clutch Cs minimoto HAMMER EPIC. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 4021
Brand: STAMAS
Pair of brake pads racing for caliper factory Stamas
Reference: 1015
Brand: STAMAS
Pair support platforms Stamas aluminium midi
Reference: 001002R026A0
Brand: DM
Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0
Reference: 143.405.003
Brand: POLINI
Reed valve for 6.2 hp engine with inserts. The Polini minibike reed valve is compatible with Polini 6.2 crankcases. Polini Code: 143.405.003
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: XR.CNF.001
Brand: XRACING
Perforated barrel for XRACING minibike silencer, designed to lower decibels ensuring an efficient exit of the exhaust gases. Outer diameter: 18mm Inner diameter: 16mm Length: 196mm
Reference: 6006
Brand: STAMAS
Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.
Reference: 2020x2
Brand: STAMAS
Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.
Reference: GHR 060.001
Brand: GHR
Minibike silencer Ghr. Metal silencer compatible with Cs, Ghr, Bzm exhausts.
Reference: GHR 022.001
Brand: GHR
GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.
Reference: 143.130.001
Brand: POLINI
Reverso Polini water pump shaft. Original Polini spare part. Code: 143.130.001.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Brake wire clamp Grc
