Engine support pin Dm

Reference: GM.3MS

Brand: CS Racing

3 mass clutch springs guide

Clutch spring guide 3 masses cs racing iame. Spring guide specific for Cs clutch.

Reference: 143.145.002

Brand: POLINI

Bell minibike 80 mm Polini

Clutch bell for Polini minibike internal diameter 80,3 mm, for pinion M8. The bell is only compatible with Polini minibikes, it is recommended to combine it with the original Polini clutch. Polini Code: 143.145.002

Reference: Pistone36bzm

Brand: Tecnominimoto

Minimoto piston 36mm for Bzm Tcm Or Malossi

Minibike piston diameter 36 mm for engines: Bzm, Tcm, Or, Malossi. The 36 mm diameter flat head piston is compatible with engines: Bzm, Tecnominimoto, Maloss, Orioli. 10mm plug.

Reference: 088

Brand: DM

Minimbike plastic tank cap

Plastic minibike tank cap, compatible with: Dm, Stamas, Blata. The minibike cap is knurled, to allow an optimal grip when opening and closing.

Reference: zoc100.0504

Brand: Zocchi

Minimoto clutch shim kit

Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).

Reference: GHR 024.001

Brand: GHR

Axis coupling 14/5 X 32.3 piston rod Ghr

Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.

Reference: 143.065.001

Brand: POLINI

Polini minibike engine seals (15x22x5) 143.065.001

Polini oil seals series for minimoto engine oil seals size: 15x22x5 mm. The 15x22x5 minimoto engine oil seals are indicated exclusively for Polini 4.2 and 6.2 engines. Polini Code: 143.065.001 Ean code: 8054705014857 External diameter 22 mm Internal diameter 15 mm Thickness 5 mm

Reference: 143.015.011

Brand: POLINI

H2o head with long thread minimoto Polini

Polini h2o minibike head with long thread Code: 143.015.011

Reference: 001002R014A0

Brand: DM

Front wheel spacers Dm

Pair of DM minimoto front wheel spacers. DM Code: 001002R014A0

Reference: Kit-revisione-fg-gubellini

Fg Gubellini minibike steering damper overhaul kit

Fg Gubellini minibike steering damper overhaul kit. Kit for overhauling the steering damper for minibikes, consisting of: Complete OR kits. Oil seal kit. Specific hydraulic oil for steering damper. Attention: photo purely illustrative, the actual kit differs from the images. Attention: we recommend contacting a specialized workshop to assemble the kit.

Reference: 2036 6 18NC

Brand: PBR

M10 Z6 Minibike Sprocket

M10 Z6 reinforced minimoto sprocket. Universal minibike sprockt M10 Z6. Compatible with bell: Xracing CS Iame BZM GHR

Reference: 143.465.001

Brand: POLINI

Air filter box for carburetor d.14 sha 143.465.001

Air filter for Polini minimoto, the filter is compatible with the SHA 14 carburettor. Polini code: 143.465.001

Reference: GHR 039.001

Brand: GHR

Ghr mass guide for minimoto clutches

Ghr mass guide for minimoto clutches

Reference: 001002R04700

Brand: DM

Minimoto soft gas thread DM 90cm

Soft throttle wire for minimoto, this throttle cable allows you to reduce the force required to rotate the throttle, allowing you to accelerate more smoothly and quickly. The gas cable is 90 cm long, with a diameter of 1 mm. DM Code: 001002R04700

Reference: curva.cs.racing

Brand: CS Racing

Cs racing curve with sectors for 10 and 12 mm flange

Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.

Reference: 143.270.014

Brand: POLINI

Intake manifold d.14 in rubber engine 4.2 hp Polini 143.270.014

Intake manifold diameter 14 mm in rubber 4.2 hp Polini minimoto engine. Polini Code: 143.270.014