- On sale!
- Reduced price
- New

Xmotorstore Payments
Pair of DM swingarm adjusters from 2008 standard
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: tcm-014002
Brand: Tecnominimoto
Bzm Tcm exhaust manifold. Exhaust manifold for minibikes, compatible with Bzm, Grc, Tcm mufflers. Standard version, with standard curve.
Reference: 115.010.022
Brand: BZM
Gasket kit for Bzm 40cc 2t air engine. Gasket kit for Bzm minimoto engine, diameter 36 mm, 40cc, air-cooled. Bzm gaskets compatible with Bzm 420 and 620 engine crankcases. Diameter: 36 mm. Displacement: 40cc. Crankcase: 420 and 620. Cooling: AIR.
Reference: 2010
Brand: STAMAS
Pair of Stamas fork plates diameter 25 mm. The Stamas triple trees are machined from solid, designed to house 25 mm fork stems.
Reference: tcm201836
Brand: Tecnominimoto
TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.
Reference: Allu-frame-dm
Brand: DM
DM full aluminum minimoto frame kit. DM aluminum frame, original DM. DM minimoto frame, completely in aluminum, very high quality product, compatible with MIDI and MINI versions. Compatible with air and water versions. Offered on the Factory Racing DM racing versions. The total weight is only: 1430 grams. VERY RARE AND UNFINDABLE, LAST PIECE AVAILABLE.
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: 093
Brand: DM
New DM 2021 front fairing in reinforced resin. Minimoto fairing model Dm 2021, compatible with previous models. Dm Code: 093
Reference: 2021 X 2
Brand: STAMAS
Stamas clip-on handlebar clamps cnc separable for 58 mm diameter forks with screws, 2 pieces.
Reference: 112.223.50
Brand: GRC
Aluminium saddle support midi rrz 2008-2010 Grc
Reference: 144.750.008
Brand: POLINI
Pair of Polini minibike mechanical brake pads, Polini minibike brake pads have a hole distance of 22 mm. CODE: 144.750.008
Reference: 001002SP1280
Brand: DM
Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.
Reference: 1014
Brand: STAMAS
Pair support platforms Stamas aluminium mini
Reference: 4024
Brand: STAMAS
Cnc hydraulic support for rear caliper factory Stamas
Reference: 7007
Brand: STAMAS
Distance internal front hub Stamas factory
Reference: 001002A00800
Brand: DM
Spacer plus screw on clutch side Dm. The spacer is used to maintain the distance between the pedal and the pinion in the event of a fall, thus preventing the pinion from breaking.
Reference: M099900-EL1
Brand: PMT TYRES
Electric minimoto tire remover 220 Volts / 1Ph / 50 Hz. Professional tire remover for minimoto tires and 6.5 "in general. various measures. Height adjustable manual bead breaker. Wheel support plate with manual locking. Wheel support plate with two-way rotation controlled by: manual (mod. BABY-M), with electric motor (mod. BABY-E). Standard power supply...
Pair of DM swingarm adjusters from 2008 standard