Spacer aluminum for muffler Dm

Reference: 001002SP1170

Brand: DM

special Kit water pipes shaped

Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.

Reference: 143.010.015

Brand: POLINI

Polini cylinder with piston d.36 3 reverso transfer 143.010.015

Polini cylinder with water piston d.36 3 reverse transfers. Polini code: 143.010.015

Reference: MLL.0042

Brand: CS Racing

Red Clutch springs wire 2.5 mm

Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.

Reference: GHR 037.001

Brand: GHR

Red clutch springs 2,5 mm Ghr

Red clutch springs 2,5 mm Ghr

Reference: 335.033.02

Brand: Blata

Collar semi-handlebars for stems 28mm Blata

Collar semi-handlebars for stems 28mm Blata

Reference: IMA-20502

Brand: CS Racing

Gasket for exhaust Iame flange (10 12 15)

Iame exhaust gasket for flange 10 12 15. Cs exhaust gasket. ATTENTION: PACK OF 1 PIECE.

Reference: TCM012

Brand: Tecnominimoto

TCM sintered minimoto jaws

TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.

Reference: MLL.0040

Brand: CS Racing

Green clutch springs 2.2mm

Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.

Reference: BZM-022025

Brand: BZM

Dome head Bzm d.40 50cc

Reference: GHR 014.002

Brand: GHR

Gasket kit oring cylinder Ghr 50cc

Gasket kit oring cylinder Ghr 50cc 

Reference: 109

Brand: DM

Seatpost Dm 7020 with hexagon inserts

Dm minimoto seat post reinforced 7020 aluminum. Weight: 567g

Reference: KT0.0031

Brand: CS Racing

Clutch plate pins Cs

Clutch plate pins Cs

Reference: 143.680.002

Brand: POLINI

Polini minimoto starter wheel 143.680.002

Polini minimoto starter wheel, compatible with Polini starter and others. The rope winder wheel is used to engage the ignition with the flywheel, in order to start the minimoto. Wheel external diameter: 71 mm Rope channel: 3.5 mm Polini Code: 143.680.002

Reference: 143.750.005

Brand: POLINI

Front brake caliper Polini 910 RS 143.750.005

Polini 910 RS minimoto front brake caliper. Polini Code: 143.750.005 Polini 910 RS hull minimoto brake caliper, compatible with 5-inch and 6.5-inch versions.

Reference: 143.420.001

Brand: POLINI

Polini 910 rear brake caliper lever with spring 143.420.001

Polini 910 rear brake caliper lever with spring. Polini 910 mini bike rear brake caliper lever with return spring included. Polini Code: 143.420.001

Reference: 2004

Brand: STAMAS

Aluminum spacer for fork 24 mm

Aluminum spacer for fork 24 mm