- On sale!
- Reduced price
- New

Xmotorstore Payments
Rear Hub 116 Mm 5 Holes Sprocket with bearings
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 4667 54 L
Brand: DM
DM minimoto sprocket in ergal with 5 holes, new version. Crown dedicated only for Dm minibikes.
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 130
Brand: DM
New DM minimoto rear brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Specifications: Weight: 142g Thickness: 2.5cm
Reference: 001002SP095D
Brand: DM
Rear wheel pin for aluminum swingarm Dm
Reference: 143.465.001
Brand: POLINI
Air filter for Polini minimoto, the filter is compatible with the SHA 14 carburettor. Polini code: 143.465.001
Reference: CSR.SCR.028C
Brand: CS Racing
Cs exhaust cylinder fitting for 40cc and 50cc engines without flange. Cs fitting measures: Center distance of cylinder attachment holes 47 mm Screw connection hole 6.5 mm Manifold connection 28 mm Base plate thickness 4 mm Height of pipe connection manifold 15 mm
Reference: GHR 559.010
Brand: GHR
Ghr expansion for 40cc air motor (10 12 15 and free). Available to choose between: Ghr expansion for 40cc flange 10 air motor. Ghr expansion for 40cc flange 12 air motor. Ghr expansion for 40cc flange 15 air motor. Ghr expansion for 40cc flanged air motor.
Reference: 143.800.072
Brand: POLINI
Front left disc cover for Polini 910 RS minimoto. Polini Code: 143.800.072 Polini S and RS minimoto front disc protection.
Reference: 7007
Brand: STAMAS
Distance internal front hub Stamas factory
Reference: 143.355.005
Brand: GRC
Or pump transmission to the pinion. Code: 143.355.005
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: GM.3MS
Brand: CS Racing
Clutch spring guide 3 masses cs racing iame. Spring guide for universal 3-mass clutch, compatible with 3-mass plate BZM and CS racing.
Reference: 143.395.020
Brand: POLINI
Polini minimoto rear brake wire, for mechanical brakes. Polini code: 143.395.020
Reference: 5002
Brand: STAMAS
Stamas cnc racing wheel 60mm Stamas wheel weight 515g
Reference: Stms.sup.ped
Brand: STAMAS
Minimoto Stamas Footpeg supports first series.
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: 143.730.001
Brand: POLINI
Complete 5 "front Polini rim. Polini Code: 143.730.001
Reference: 102B
Brand: DM
Dm Junior 2025 minimoto set-up variators New Dm set-up variators for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific set-up position for Junior riders.
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Rear Hub 116 Mm 5 Holes Sprocket with bearings