- On sale!
- Reduced price
- New

Xmotorstore Payments
Minimoto Dm adjustable steering damper Fg gubellini. The shock absorber for minibikes most used in competitions.
The Gubellini steering damper for Dm minibikes has a stroke of 50 mm, with an ergal body.
Minimoto Dm adjustable steering damper Fg gubellini. The shock absorber for minibikes most used in competitions.
The Gubellini steering damper for Dm minibikes has a stroke of 50 mm, with an ergal body.
Reference: 001002R08000
Brand: DM
hardware kit for frame and minimoto fairings Dm
Reference: 073
Brand: DM
Fairing Frame Quick Coupling For FG Shock Absorber
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 114
Brand: DM
DM rear fender for aluminum swingarm from 2012 Weight: 94g Dm Code: 114
Reference: 143.750.003
Brand: POLINI
Rear brake disc d.122 Polini Polini code : 143.750.003 Ean Code: 8054705021879
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 2013 A
Brand: STAMAS
Pair of Stamas factory midi fork tubes diameter 25 in aluminum.
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: Z.200.0021
Brand: Zocchi
Pinion minimoto Blata C1 M8x1. Pinion made in Italy, specific for Blata C1 minimoto with M8x1 thread pitch, only for Chinese bells with full thread connection.
Reference: tcm201836
Brand: Tecnominimoto
TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.
Reference: 9003
Brand: STAMAS
Antivibration grommets with spacers and screws for Stamas standard radiator
Reference: 143.002.002
Brand: POLINI
Polini air 6.2 junior minimoto engine. The air-cooled Polini 6.2 engine is suitable for children and Junior categories. The 6.2 hp engine is supplied with a 14.14 L Dellorto carburettor, including fuel pipe and throttle cable.
Reference: tcm652
Brand: Tecnominimoto
Carter Bell Blata. Bell housing machined from solid TCM for 3-hole Blata.
Reference: SKU 2550
Brand: Tecnominimoto
Tcm minibike engine crankcase for Bzm Or Tcm. Cast minibike engine crankcase for 2-stroke engines, compatible with: Bzm, Orioli, Tcm.
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 143.625.001
Brand: POLINI
Polini 910 RS minimoto swingarm. Polini code: 143.625.001 complete left and right swingarm kit for Polini 910 RS and S.
Reference: 143.270.016
Brand: POLINI
Intake manifold diameter 19 for Polini reverse engine. Manifold suitable for Polini gp3 gp4 gp5 gp6 with reverse engine. Polini code: 143.270.016
Reference: CSR.MAS.0010
Brand: CS Racing
Clutch masses Cs racing minimoto. Replacement masses for minimoto clutch, cs racing. Features: Kevlar base. Use: junior - senior. To be used with 80 mm bell.
Minimoto Dm adjustable steering damper Fg gubellini. The shock absorber for minibikes most used in competitions.
The Gubellini steering damper for Dm minibikes has a stroke of 50 mm, with an ergal body.