Steering bearings plus spacer and midi bushings

Reference: GHR 022.001

Brand: GHR

Reinforced engine support Ghr

GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.

Reference: 143.080.001

Brand: POLINI

Standard Polini Crankshaft

Standard polini minimoto crankshaft. Shaft compatible with Polini 6.2 and 4.2 Polini engine. Polini Code: 143.080.001

Reference: F00 005

Brand: DM

Lightened rear hub 114 mm DM ( for hydraulic brake )

Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS

Reference: 1003

Brand: STAMAS

Front fairing support frame Stamas

Front fairing support frame Stamas

Reference: curva.cs.racing

Brand: CS Racing

Cs racing curve with sectors for 10 and 12 mm flange

Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.

Reference: MLL.0041

Brand: CS Racing

Blue clutch spring 2,3mm (JUNIOR)

Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.

Reference: GHR 007.001

Brand: GHR

Gasket oring viton discharge 5 pcs for flange Ghr

Viton exhaust oring gasket 5 pieces for flange Ghr

Reference: FM40039-20

Brand: Formula

Formula master cylinder reservoir kit

Formula pump tank cap kit. Formula code: FM40039-20

Reference: 143.310.002

Brand: POLINI

Reverso engine ignition dice with start-up engagement 143.310.002

Reverse engine ignition nut with starter coupling. Replacement for Polini reverso minimoto. Polini Code: 143.310.002

Reference: 143.330.003

Brand: POLINI

Polini minibike water tank 143.330.003

Polini minibike water tank. Polini code: 143.330.003 Water filling bottle for Polini minibike cooling system, the tray includes a cap.

Reference: 1010

Brand: STAMAS

Chain tensioner factory Stamas

Chain tensioner factory Stamas. ATTENTION: Color may change without notice.

Reference: PISTONE IAME 40CC

Brand: CS Racing

Cs piston 40cc

Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm

Reference: 001002R07300

Brand: DM

Gasoline tap minimoto DM

Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.

Reference: 9005 S

Brand: STAMAS

Upper support bracket radiator Stamas

Upper bracket for Stamas radiator support

Reference: 4014

Brand: STAMAS

Cnc support for rear brake caliper mechanical factory Stamas

Cnc support for rear brake caliper mechanical factory Stamas 

Reference: Avv-mini-cina-metallo

Chinese minimoto starter gear

Chinese minimoto starter gear. Universal Chinese mini motorcycle starter metal gear, the metal gear allows you to avoid damage to the starter during starting, and extends its life.