Xmotorstore Payments
Shock absorber kit for RS1 Malossi 46 8017 fork
Malossi code: 46 8017.
Shock absorber kit for RS1+1 / A Malossi fork for Piaggio Zip Fast rider 2T 50 CC
SAFE AND COMFORTABLE RIDING
COMPONENTS:
- 1 hydraulic shock absorber
- 1 suspension spring
- 2 serrated washers
Technical features:
-The front fork of the Zip Fast Rider originally does not have any oscillation damping system therefore the front suspension is entrusted exclusively to the springs.
-The solution proposed by Malossi called RS 1 + 1/A places an anti-sinking spring in one leg and a hydraulic shock absorber in the other inside the fork. The spring is made of variable pitch alloy steel with recalculated load.
-This kit has been designed and tested specifically for the Piaggio Zip Fast Rider Scooter equipped with a front wheel equipped with rigid bearings and disc brake.
-We strongly advise against mounting this kit on scooters without bearings in the front wheel.
Malossi fork shock absorber kit for:
Malossi shock absorber kit for fork for PIAGGIO ZIP Fast Rider 50 2T.
Reference: 144.340.005
Brand: POLINI
Idm Polini ignition support plate Code: 144.340.005 Ignition support plate for 2-stroke Polini engine
Reference: 201.1906
Brand: POLINI
Polini carburetor for Ape 50 diameter 19 mm. Polini Code: 201.1906. Polini Cp carburetor for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL, Polini. It is mounted on the original Piaggio manifold. Polini carburetor calibration for Ape: Maximum jet 86 Minimum Jet 32 Needle 14/22 24x30 valve Pulverizer bush diameter 2.6 mm Mixer connection: YES.
Reference: 01.SZ.0708.L
Brand: Ohvale
Ohvale Drive gear oil pump Code: 01.SZ.0708.L
Reference: 01.SC.0042.L
Brand: Ohvale
Db killer Ohvale Gp-0 Gp-2 110 160. Ohvale code: 01.SC.0042.L Db killer for Ohvale gp2 and Gp0, with 110 or 160 cc 4t engine. Attention: Compatible with silencer prepared for Db killer.
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 143.070.003
Brand: POLINI
Reverso Polini crankcase couple. Polini Code: 143.070.003
Reference: 03.AS.0050.L
Brand: Ohvale
Ohvale Inlet spacer 110A EVO Code: 03.AS.0050.L
Reference: 318556
Brand: Malossi
Malossi thermal unit diameter 40 mm in cast iron 318556 Code: 318556 Malossi cylinder kit in cast iron diameter 40 mm with pin diameter 10 mm for h2o engine Malossi cast iron thermal units, the first and simplest step to modify the engine of your moped, are the best choice to continue using a standard or approved exhaust system. In these thermal groups...
Reference: MC8
Brand: HJC
Hjc i31 Iona helmet. "APC" Advanced Polycarbonate Compound: By blending high-quality polycarbonate with high-impact ABS in an optimal ratio, HJC has developed a strong, impact-resistant shell while maintaining a lightweight design. "ACS" Advanced Channel Ventilation System: Full front-to-back airflow to eliminate heat and humidity Pinlock Ready HJ-43...
Reference: 143.395.003
Brand: POLINI
Polini gas wire 143.395.003 Polini code: 143.395.003 Polini gas wire for transversal carburettor control d.14
Reference: 4514607
Brand: Malossi
Malossi Sport windshield for Honda Sh 4514607 Malossi code: 4514607. Dark smoke colored screen. Length 46.6 cm. Height 35.7 cm. Thickness 0.3 cm.
Reference: 3413706.20
Brand: Malossi
Pair of Malossi oversized forged 4T pistons for Yamaha T Max 3413706 Malossi code: 3413706. Pair of Malossi oversized forged 4T pistons, diameter 66 mm, with 15 mm diameter pin and 3 rectangular segments for original cylinder, for Yamaha T Max. Forged pistons: in special aluminum alloy (copper sil.), hardened and tinned, shaped crown with valve...
Reference: 6215005BB
Brand: Malossi
Malossi approved brake pads Malossi code: 6215005BB Malossi brake pads for APRILIA APRILIA RS 50 2T LC euro 2 2006-> (DERBI D50B1) Rear APPROVED. Malossi brake pads for APRILIA APRILIA RX 50 2T LC 2007-> (DERBI D50B0) Front - Rear APPROVED. Malossi brake pads for APRILIA APRILIA SX 50 2T LC 2007-> (DERBI D50B0) Front - Rear APPROVED. Malossi...
Reference: 144.470.002
Brand: POLINI
Polini air filter X1-X3-X5 racing model Code: 144.470.002
Reference: 0025244.318.063
Brand: Acerbis
Acerbis Dna Sh Harness Black Yellow 0025244. CONSTRUCTION AND DESIGN: Innovative multilayer of soft materials with high impact absorption: ventilation, protection, lightness and flexibility. Elastic waistband. The low thickness and softness of the bust and back protection are designed for the use of the neck-brace. BODY PROTECTIONS: Chest protector with...
Shock absorber kit for RS1 Malossi 46 8017 fork
Malossi code: 46 8017.
Shock absorber kit for RS1+1 / A Malossi fork for Piaggio Zip Fast rider 2T 50 CC
SAFE AND COMFORTABLE RIDING
COMPONENTS:
- 1 hydraulic shock absorber
- 1 suspension spring
- 2 serrated washers
Technical features:
-The front fork of the Zip Fast Rider originally does not have any oscillation damping system therefore the front suspension is entrusted exclusively to the springs.
-The solution proposed by Malossi called RS 1 + 1/A places an anti-sinking spring in one leg and a hydraulic shock absorber in the other inside the fork. The spring is made of variable pitch alloy steel with recalculated load.
-This kit has been designed and tested specifically for the Piaggio Zip Fast Rider Scooter equipped with a front wheel equipped with rigid bearings and disc brake.
-We strongly advise against mounting this kit on scooters without bearings in the front wheel.
