Xmotorstore Payments
Malossi rear shock absorber Rs24 wheelbase 330 mm 4614223
Malossi code: 4614223
Malossi rear Rs24 shock absorber, 330 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-spring preload to adapt the vehicle's running position;
- setup variation system for cornering behaviour.
Technical features
-These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today.
-Oleopneumatic suspension with pressurized nitrogen chambers
-Separate compensation tank which allows an increase in the quantity of internal fluids
-Hydraulic adjustment in rebound and compression via ring nut
- Wheelbase adjustment
- Vehicle trim adjustment
-Stroke: art.4614223: 70 mm – art.4614245: 40 mm
- Wheelbase: art.4614223: 330 mm – art.4614245: 270 mm
-Adjustable attachment forged in ergal 55 with anodic oxidation
-Attachment made from Ergal 55 with anodic oxidation.
NOTE: the art. 4614223 is equipped with all the necessary nuts and bolts for application on both Minarelli and Piaggio engines.
Malossi shock absorber for:
Malossi shock absorber for Aprilia SR 50 2T 1994->.
Malossi shock absorber for Aprilia Rally 50 2T (Minarelli).
Malossi shock absorber for Aprilia SR Netscaper 50 2T LC (Minarelli).
Malossi shock absorber for Aprilia Rally 50 2T LC (Minarelli).
Malossi shock absorber for Aprilia SR Racing 50 2T LC (Minarelli).
Malossi shock absorber for Aprilia SR (carb.) 50 2T LC 2004-> (Piaggio).
Malossi shock absorber for Aprilia SR 50 2T <-1993.
Malossi shock absorber for Aprilia SR R 50 2T LC euro 4 2018-> (Piaggio CA81M).
Malossi shock absorber for Aprilia SR R Factory 50 2T LC (Piaggio C361M).
Malossi shock absorber for Aprilia SR Ditech GP1 50 2T LC (Piaggio C361M).
Malossi shock absorber for Aprilia SR Replica 50 2T LC <-1999.
Malossi shock absorber for Aprilia SR R (carb.) 50 2T LC (Piaggio).
Malossi shock absorber for Aprilia SR Street 50 2T LC euro 2.
Malossi shock absorber for Aprilia SR Stealth 50 2T LC (Minarelli).
Malossi shock absorber for Aprilia SR WWW 50 2T.
Malossi shock absorber for Suzuki Street Magic 50 2T.
Reference: 6716430B
Brand: Malossi
Wheel axle shaft 138.2 mm with 27 mm diameter keying Malossi 6716430B Malossi code: 6716430B
Reference: 1082.82.40.06
Brand: Domino
Domino Japan style grips closed 1082.82.40.06 Material: Thermoplastic rubber Black colour Length: 134 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 52 mm Handle diameter Knob mounted: 31/33 mm
Reference: 7417246B
Brand: Malossi
Malossi cooling fan diameter 187 mm for Vespower ignition 7417246B Malossi code: 7417246B
Reference: 3212223
Brand: Malossi
Malossi Gp Mhr 3212223 exhaust for Rieju Code: 3212223 The racing muffler born on the track for the track. It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs. Malossi trophies are raced all over the world according to precise formulas, which foresee...
Reference: 3113438
Brand: Malossi
Malossi cylinder diameter 56 in aluminum with pin diameter 15 for Pit bike 4T (LIFAN 1P55FMJ) 140 cc Malossi code: 3113438 Malossi cylinder for Pit Bike 140 4T (Lifan 1P55FMJ).
Reference: 202.1334
Brand: POLINI
Elongated primary gear Cagiva City 50 Z 17-41 Code: 202.1334 Application: Cagiva, Cagiva City 50
Reference: 280.0010
Brand: POLINI
Polini pin cage 16X20X22.5 mm (silver). Polini code: 280.0010 Polini pin cage for: Cagiva, Cagiva Freccia 125 C10, Cagiva Freccia 125 C12, Cagiva Freccia 125 C9, Gilera, Gilera Rv 125, Gilera RX 125, Polini, Polini Thor engine spare parts
Reference: 206.0206
Brand: POLINI
Polini segment diameter 47.4x1.2 mm 47.4x1.2 mm segment compatible with all types of motorcycles
Reference: 01.RA.0023.L
Brand: Ohvale
Front wheel Ohvale bearing till 2020 Code: 01.RA.0023.L
Reference: 504003
Brand: T4TUNE
Typhoon 345mm adjustable hydraulic shock absorber
Reference: 01.MA.0008.L
Brand: Ohvale
Ohvale Gp-0 160 4S clutch cable. Ohvale code: 01.MA.0008.L Compatibility: Ohvale Gp-0 clutch cable 160 4S up to 2021. Ohvale Gp-0 clutch cable 190 Daytona up to 2019.
Reference: 02 2726B
Brand: Malossi
Malossi inclined 34 mm diameter intake manifold 02 2726B Code: 02 2726B Malossi intake manifold with 60 mm center distance for Phm 40 carburetors with rigid connection
Reference: 01.SD.0615.L
Brand: Ohvale
Ohvale Gasket cover clutch Code: 01.SD.0615.L
Reference: 07149211
Continuous adjustment Min/max operating temperature: -20 to 60°C Nozzle hole diameter: 2.9mm Max operating pressure: 16 bar Material: Polyoxymethylene Pneumatic Connection: 1/4 inch FT Ergonomic insulated handle Lightweight and robust design
Reference: 211.0014
Brand: POLINI
Vespa head P 200 E. Polini code: 211.0014 This head can also be mounted on the cast iron cylinders of the kit 140.0082
Reference: 248.108
Brand: POLINI
Polini variator belt for Honda Vision 50 4T Code: 248.108 Application: Honda, Honda Vision 50 4T
Malossi rear shock absorber Rs24 wheelbase 330 mm 4614223
Malossi code: 4614223
Malossi rear Rs24 shock absorber, 330 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-spring preload to adapt the vehicle's running position;
- setup variation system for cornering behaviour.
Technical features
-These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today.
-Oleopneumatic suspension with pressurized nitrogen chambers
-Separate compensation tank which allows an increase in the quantity of internal fluids
-Hydraulic adjustment in rebound and compression via ring nut
- Wheelbase adjustment
- Vehicle trim adjustment
-Stroke: art.4614223: 70 mm – art.4614245: 40 mm
- Wheelbase: art.4614223: 330 mm – art.4614245: 270 mm
-Adjustable attachment forged in ergal 55 with anodic oxidation
-Attachment made from Ergal 55 with anodic oxidation.
NOTE: the art. 4614223 is equipped with all the necessary nuts and bolts for application on both Minarelli and Piaggio engines.
