Xmotorstore Payments
Malossi rear shock absorber Rs24 wheelbase 290 mm 4614237
Malossi code: 4614237
Malossi rear shock absorber Rs24, wheelbase 290 mm for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic compression system (separate for low and high speed);
-spring preload to adapt the vehicle's running position;
- setup variation system for cornering behaviour.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank
-Use: racing scooter
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension
-New lamellar system in harmonic steel which allows for very precise calibration
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometic adjustment of spring pre-load via ring nuts
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions
-Double adjustment of the hydraulic compression braking, pre-selectable on approximately 10 positions each, separate for low and high speed
-Special oil with low viscosity and practically insensitive to temperature variations
-External compensation tank which allows an increase in the quantity of internal fluids
- Wheelbase adjustment of 25 mm (only for rear shock absorber)
- Wheelbase: rear 321 + 25 mm - front 181 mm
-Stroke: rear 62 mm - front 45 mm
Malossi shock absorber for:
Malossi shock absorber for Gilera Easy Moving 50 2T.
Malossi shock absorber for Gilera Runner PureJet 50 2T LC <-2005.
Malossi shock absorber for Gilera Runner PureJet 50 2T LC 2006->.
Malossi shock absorber for Gilera Runner SP 50 2T LC <-2005.
Malossi shock absorber for Gilera Runner SP 50 2T LC 2006-> (C451M).
Malossi shock absorber for Gilera Runner FX 125 2T LC.
Malossi shock absorber for Gilera Runner FXR - SP 180 2T LC.
Malossi shock absorber for Gilera Runner 50 2T LC.
Malossi shock absorber for Gilera Storm 50 2T.
Malossi shock absorber for Piaggio NRG Power 50 2T LC euro 4 2018->2020 (CA71M).
Malossi shock absorber for Piaggio Free 50 2T.
Malossi shock absorber for Piaggio Liberty 50 2T.
Malossi shock absorber for Piaggio Quartz 50 2T LC. The pair of shock absorbers 4614479 is also available.
Malossi shock absorber for Piaggio Sfera Restyling 50 2T.
Malossi shock absorber for Piaggio Sfera 50 2T.
Malossi shock absorber for Piaggio Zip Fast Rider 50 2T.
Malossi shock absorber for Piaggio Zip 50 2T 2000-> (C25EM).
Malossi shock absorber for Piaggio Zip 50 2T <-1999.
Malossi shock absorber for Piaggio Zip SP 50 2T LC 2001->. The pair of shock absorbers 4614479 is also available.
Malossi shock absorber for Piaggio Zip SP 50 2T LC <-2000. The pair of shock absorbers 4614479 is also available.
Malossi shock absorber for Vespa ET2 50 2T 2000->.
Malossi shock absorber for Vespa ET2 50 2T <-1999.
Malossi shock absorber for Vespa S 50 2T euro 2 (C381M).
Reference: 171.0647
Brand: POLINI
VESPA: VESPA 125 2T PRIMAVERA - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3
Reference: 03.PE.0052.L
Brand: Ohvale
Left footrest support black Ohvale Gp-0 Evo Gp-2. Ohvale code: 03.PE.0052.L New my25 footrest support in black Ohvale, compatible with Gp-0 EVO and Gp-2. ATTENTION: compatible only with black footrest and black my25 components, not with previous versions.
Reference: 267209910
Brand: Wrapper
Silver gray wrapping can. Removable paint can Silver gray wrapper 400 ml. Spray can wrap, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209910 EAN: 5907547716812 SUPPLIER CODE: 400WRAPPER7001
Reference: 5211979
Brand: Malossi
Malossi clutch shoes for adjustable automatic clutch 5211979 Malossi code: 5211979 Malossi clutch shoes for adjustable automatic clutch Maxi Delta clutch
Reference: 6111164
Brand: Malossi
X Special belt Malossi strap 16x8x832 mm angle 26 Malossi code: 6111164 Malossi belt for CAGIVA PROGRESS 50 2T. Malossi belt for DERBI ATLANTIS 50 2T <-2002. Malossi belt for DERBI ATLANTIS 50 2T LC. Malossi belt for DERBI HUNTER 50 2T. Malossi belt for DERBI PADDOCK 50 2T. Malossi belt for DERBI PADDOCK 50 2T LC. Malossi belt for DERBI PREDATOR 50...
Reference: 3484.03-01
Brand: Domino
Domino KRR 03 gold 3484.03-01 throttle without grips. Aluminum gas control without knobs. Racing use. Support material: Aluminum Support finish: Painted Colour gold Max stroke: 45 mm Rapidity: 2.6 ° / mm Throttle control designed for all motorcycles with two push-pull cables. To be installed with universal gas cables cod. 5432.96.04-00
Reference: 4012
Brand: STAMAS
Stamas factory rear mechanical brake caliper.
Reference: 171.0018
Brand: POLINI
Polini ECU control unit for Vespa and Piaggio Liberty euro 5, for 125 and 150 cc. Polini code: 171.0018. Application: Polini ECU control unit for Vespa 125 euro 5. Polini ECU control unit for Vespa 150 euro 5. Polini ECU control unit for Piaggio Liberty 125 euro 5. Polini ECU control unit for Piaggio Liberty 150 euro 5. Polini Motori presents the Polini...
Reference: 6215031BB
Brand: Malossi
Malossi approved brake pads Malossi code: 6215031BB Malossi brake pads for APRILIA LEONARDO 250 4T LC Front for vehicles MADE 1999 APPROVED. Malossi brake pads for APRILIA SCARABEO 125 4T LC (ROTAX) Front for vehicles MADE 1998-2003 APPROVED. Malossi brake pads for APRILIA SCARABEO 150 4T LC (ROTAX) Front for vehicles MADE 1998 APPROVED. Malossi brake...
Reference: 1317188
Brand: Malossi
Malossi throttle body sleeve assembly Malossi code: 1317188
Reference: 228.0010
Brand: POLINI
The new spring is the ideal replacement for the original Vespa 50/125 small frame spring. The Wave Polini Original spring is a newly designed spiral produced with high precision construction techniques. Thanks to the new honeycomb structure, it tolerates high loads despite its reduced dimensions and guarantees excellent flatness on the thrust faces of...
Reference: 5512168
Brand: Malossi
Malossi electronic control unit 5512168 Code: 5512168 Malossi electronic control unit for I cylinders - tech
Reference: 202.1402
Brand: POLINI
Piaggio Z 16-47 secondary gear with bearing Gear with bearing model 1999 Code: 202.1402 Application: Aprilia, Aprilia Sr 50 2T R, Derbi, Derbi Gp1 50 2001-2003, Gilera, Gilera Ice 50, Gilera Runner 50, Gilera Stalker 50, Gilera Storm 50/50 from 2007, Gilera Typhoon 50 up to 1999/50 XR , Piaggio, Piaggio Extrem / Extrem Lc, Piaggio MC2 50, Piaggio NRG /...
Reference: 175.0052
Brand: POLINI
Polini brake disc for Derbi-Gilera diameter 260 mm front Code 175.0052 Application: Front brake disc Derbi Senda 50 Drd R, Front brake disc, Derbi Senda 50 Extreme, Front brake disc Derbi Senda 50 R
Reference: 01.OT.0332.L
Brand: Ohvale
Ohvale Clutch protection 160 4s long spacer Code: 01.OT.0332.L
Malossi rear shock absorber Rs24 wheelbase 290 mm 4614237
Malossi code: 4614237
Malossi rear shock absorber Rs24, wheelbase 290 mm for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic compression system (separate for low and high speed);
-spring preload to adapt the vehicle's running position;
- setup variation system for cornering behaviour.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank
-Use: racing scooter
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension
-New lamellar system in harmonic steel which allows for very precise calibration
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometic adjustment of spring pre-load via ring nuts
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions
-Double adjustment of the hydraulic compression braking, pre-selectable on approximately 10 positions each, separate for low and high speed
-Special oil with low viscosity and practically insensitive to temperature variations
-External compensation tank which allows an increase in the quantity of internal fluids
- Wheelbase adjustment of 25 mm (only for rear shock absorber)
- Wheelbase: rear 321 + 25 mm - front 181 mm
-Stroke: rear 62 mm - front 45 mm
