- Reduced price
- New

Xmotorstore Payments
Malossi Rs24 rear shock absorber for Italjet 4620013
Malossi code: 4620013
Malossi rear shock absorber Rs24, wheelbase 275 mm for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.
Malossi shock absorber for:
Malossi shock absorber for Italjet Dragster 125 ie 4T LC euro 5 2021-> (JC1P58MI-3).
Malossi shock absorber for Italjet Dragster 200 4T LC euro 5 2021-> (JC1P63ML-4B).
Malossi shock absorber for Italjet Dragster 300 ie 4T LC euro 5 2024-> (AZCR).
Reference: 4620012
Brand: Malossi
Malossi front shock absorber RS24/10-R for Italjet Dragster 4620012 Malossi code: 4620012 Malossi front shock absorber RS24/10-R for Italjet Dragster wheelbase 270 mm. Rs24 front Malossi shock absorber, 270 mm wheelbase for 10" wheel. The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on...
Reference: 115.0068
Brand: POLINI
Garelli Noi-Matic-Katia 50 thermal group kit diameter 46 mm, code 115.0068 Garelli cylinder kit for: Garelli, Garelli Noi 50 Matic Cast iron cylinder
Reference: 174.2021
Brand: POLINI
Kymco sintered brake pads Code: 174.2021 Application: Kymco, Kymco Agility 50 4T / 50 4T E2 / 125/150 / 200i / 50 2T R16 / 50 2T RS Naked / 50 4T R12 E3 2016, Kymco B&W 125/150/250, Kymco Dink 50 2T air / 125 LC / 150 LC / 200/200 i DD / 50 4T, Kymco Grand Dink 150, Kymco People 250/300 S i /, Kymco Yup 250, Kymco Movie 125/150, Kymco Super 9 50,...
Reference: 61 8233
Brand: Malossi
Malossi TORQUE DRIVER torque driver with d.134 Malossi code: 61 8233 Malossi torque drivers for GILERA EASY MOVING 50 2T. Malossi torque drivers for GILERA STORM 50 2T. Malossi torque drivers for GILERA TYPHOON 50 2T. Malossi torque drivers for PIAGGIO FREE 50 2T. Malossi torque drivers for PIAGGIO NRG 50 2T LC. Malossi torque drivers for PIAGGIO NRG MC2...
Reference: 67 5235
Brand: Malossi
Malossi HTQ primary gears z 24 / 63 for Vespa 67 5235 Malossi code: 67 5235. The Malossi HTQ gears for Vespa PX collect the legacy of the first gear project produced by Malossi between the late 80s and early 90s. Completely redesigned, this pair of primary gears uses a straight tooth configuration instead of the standard helical ones.
Reference: 6219279B
Brand: Malossi
Malossi brake disc external diameter 250 - thickness 3 mm Malossi code: 6219279B
Reference: 01.OT.0260.L
Brand: Ohvale
Ohvale Gp-0 fairing wings kit painted matt black. Ohvale code: 01.OT.0260.L
Reference: 1113960B
Brand: Malossi
Complete Malossi gasket kit for 75.5 H2O 4T diameter cylinder kit Malossi code: 1113960B
Reference: 175.0043
Brand: POLINI
Polini brake disc for Piaggio Liberty, Nrg-Vespa 300-Gilera diameter 220 mm Code 175.0043 Application: Gilera Runner 125 FX 2T brake disc, Gilera Runner 125 VX 4T brake disc, Gilera Runner 200 VXR brake disc, Gilera Runner 200 ST 4T brake disc, Piaggio Liberty 50 2T brake disc, Piaggio Liberty 125 brake disc, Piaggio Liberty 125 brake disc / 150 (Leader),...
Reference: 249.030
Brand: POLINI
Clutch Yamaha Majesty 250 model 2000 diameter 145 mm Code: 249.030 Diameter: 145 mm Weight: 1357 gr. Application: Aprila, Aprila Leonardo 300, Malaguti, Malaguti Password 250, Mbk, Mbk Kilibre 300, Mbk Skycruiser 250, Mbk Evolis 250 4T ie from 2014, Peugeot, Peugeot Satelis 125, Renault, Renault Kouranos 250, Yamaha, Yamaha Majesty 250 from 2000, Yamaha...
Reference: 01.MO.0052.L
Brand: Ohvale
Ohvale ZS 160 cc 4S Sealed Engine 01.MO.0052.L New Ohvale ZS 160 cc 4-speed engine. The ZS "ZongShen" engine is Ohvale's official choice for original equipment, reliable and with excellent performance, it allows amateur but also racing use. Attention: Engine with Ohvale seals. Attention: Engine for racing use only, not usable for road use!. Illustrative...
Reference: 204.0001/D
Brand: POLINI
Polini piston diameter 48 mm selection D (47.965 mm) Polini piston for: Minarelli, Minarelli P4, Minarelli P6, Polini, Fantic motor, Fantic motor regularity 50
Reference: 03.FA.0108.L
Brand: Ohvale
Mupo Ohvale Gp-2 right return fork cap. Ohvale code: 03.FA.0108.L. Mupo right return fork stem cap for Ohvale Gp2.
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: 3113243
Brand: Malossi
Malossi cylinder diameter 52 in aluminum with pin diameter 13 4T Malossi code: 3113243 Malossi cylinder for Baotian Eco Bike 50 4T (139 QMB). Malossi cylinder for Baotian Rebel - Rocky - Tanco 9/12 50 4T. Malossi cylinder for Garelli Flexi' 50 4T euro 2 (1P139 QMB). Malossi cylinder for Garelli Tiesse Four 50 4T euro 2 (1P39QMB). Malossi cylinder for...
Reference: 244.010
Brand: POLINI
Fixed half-pulley Yamaha Mbk Aprilia Malaguti. Polini Code: 244.010
Reference: parafango ant carb DM
Brand: DM
DM Minibike mudguard in carbon, unique design, durable and extremely light. The fender for DM in carbon is compatible with the original attacks, no modification is required. Weight: 56 grams
Malossi Rs24 rear shock absorber for Italjet 4620013
Malossi code: 4620013
Malossi rear shock absorber Rs24, wheelbase 275 mm for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.