Xmotorstore Payments
Malossi front shock absorber Rs24 wheelbase 270 mm 4620012
Malossi code: 4620012
Rs24 front Malossi shock absorber, 270 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.
Malossi shock absorber for:
Malossi shock absorber for Italjet Dragster 125 ie 4T LC euro 5 2021-> (JC1P58MI-3).
Malossi shock absorber for Italjet Dragster 200 4T LC euro 5 2021-> (JC1P63ML-4B).
Malossi shock absorber for Italjet Dragster 300 ie 4T LC euro 5 2024-> (AZCR).
Reference: 01.RP.0020.L
Brand: Ohvale
Bolt Ohvale M8x25 Code: 01.RP.0020.L
Reference: 215.0433
Brand: POLINI
Polini 360 degrees horizontal intake manifold for Yamaha compatible with Dellorto 26 28 30. Polini code: 215.0433 This manifold is used with the carburetor mounted towards the rear wheel, subject to modification of the frame.
Reference: 6119850B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6119850B Half-pulley in silicon aluminum alloy machined with extremely precise CNC machines and diamond finishing, with recalculated profile of the roller sliding tracks.
Reference: 5207.03-00
Brand: Domino
Domino Krk Evo 5207.03-00 gas control with knobs. Aluminum throttle control with A260 black / orange closed mod knobs: 100% compatible with original KTM offroad 4T cables With 4 ring nuts supplied for greater speed adjustment Honda, Kawasaki, Husaberg, Husqvarna, Suzuki and KTM throttle cables available for off-road mods. Racing use. Support material:...
Reference: 206.0204
Brand: POLINI
Polini segment diameter 43.5x1.2 mm Polini segment for: Puch, Puch Maxi, Polini
Reference: 7006
Brand: STAMAS
Distance internal front hub standard
Reference: 120
Brand: DM
Dm handlebars complete with clamp diameter 28 mm
Reference: 200.2060
Brand: POLINI
Polini muffler for Vespa 50 silenced expansion. Polini Code: 200.2060. The Polini 200.2060 muffler is compatible with: VESPA 50 2T SPECIAL
Reference: 143.630.015
Brand: POLINI
Front wheel pin with spacers for Polini 910/911 minimoto for mounting 6.5 "rims code 143.630.015
Reference: 143.070.001-USATO
Brand: POLINI
Used Polini 4.2 hp minibike engine crankcase. Used Polini 2.4 hp engine crankcase, for minibikes, the crankcase includes the reed valve pack and the original Polini manifold. Attention: Intact and in perfect condition, the bearings and oil seals need to be replaced.
Reference: A1600
Brand: Alfano
Rpm cable 250 cm Alfano A1600. This lead is used to read the ignition coil high voltage RPM motor speed. Attention: this article is delivered in the box with the PROIIIevo, ref. A1020, A1021, A1022
Reference: EK415SH 140
Brand: EK (Enuma Chain)
Motorcycle chain EK 415SH 140 links. Motorcycle chain step 415 of 140 links with SPJ joint (Clip joint).
Reference: 01.OT.0601.L
Brand: Ohvale
Ohvale Gp-0 and Gp-2 fork preload adjustment kit. Ohvale code: 01.OT.0601.L Fork spring preload adjustment kit for Ohvale GP-0 and GP-2 with 33 mm diameter fork.
Reference: 01.CA.0081.L
Brand: Ohvale
Ohvale Front fairing RT Painted Code: 01.CA.0081.L
Reference: MC5SF
Brand: HJC
Hjc i71 Celos helmet Advanced composite polycarbonate shell: Lightweight, superior fit and improved comfort Advanced Ducting Ventilation System "ACS": Full airflow, front to back, moves heat and humidity up and out. HJ-38 VISOR Pinlock ready: Offers 99% UV protection, scratch-resistant coating. Quick ratchet system of the visor (Shield), simple and safe....
Reference: 285.0502
Brand: POLINI
Polini valve oil seal set for 4-valve head Polini oil seal series for: Polini, Polini XP4T 110
Malossi front shock absorber Rs24 wheelbase 270 mm 4620012
Malossi code: 4620012
Rs24 front Malossi shock absorber, 270 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.
