Degreaser for the inside of the mufflers. Eliminates crystallizations and unburned residues inside any muffler, both 2-stroke and 4-stroke, regenerating the exhausts like new without mechanical actions.
Indications: Magic-Shine EXHAUST is a concentrated detergent degreaser for the inside of 2-stroke and 4-stroke mufflers. Specially formulated to eliminate dirt such as carbon residues and crystallizations of unburned oil, suitable for internal cleaning of mufflers. EXHAUST CLEANER eliminates any type of residue, even the oldest ones caused by oil residues, its formulation makes it safe for every drain. Professional use, not subject to biodegradability.
Instructions for use: Shake the contents - Wear gloves/protective clothing/Protect your eyes/face - Seal one of the two exhaust holes (inlet or outlet), pour the EXHAUST CLEANER inside the muffler until completely filled, leave to act based on the hardness of the residues to be removed (In some cases even up to 24 hours), then recover the liquid to be able to reuse it, rinse the inside of the residues, or immerse and scrub with a brush or toothbrush until removed.
Degreaser for the inside of the mufflers. Eliminates crystallizations and unburned residues inside any muffler, both 2-stroke and 4-stroke, regenerating the exhausts like new without mechanical actions.
Indications: Magic-Shine EXHAUST is a concentrated detergent degreaser for the inside of 2-stroke and 4-stroke mufflers. Specially formulated to eliminate dirt such as carbon residues and crystallizations of unburned oil, suitable for internal cleaning of mufflers. EXHAUST CLEANER eliminates any type of residue, even the oldest ones caused by oil residues, its formulation makes it safe for every drain. Professional use, not subject to biodegradability.
Instructions for use: Shake the contents - Wear gloves/protective clothing/Protect your eyes/face - Seal one of the two exhaust holes (inlet or outlet), pour the EXHAUST CLEANER inside the muffler until completely filled, leave to act based on the hardness of the residues to be removed (In some cases even up to 24 hours), then recover the liquid to be able to reuse it, rinse the inside of the residues, or immerse and scrub with a brush or toothbrush until removed.
Biodegradability:
NOT SUBJECT TO BIODEGRADABILITY. For professional use.
Malossi MHR REPLICA cylinder kit diameter 47 in aluminum with pin diameter 10
Malossi code: 31 8437
Malossi cylinder kit for AEON MOTOR COBRA 50 2T (AT70). If the crankshaft has a Ø 12 pin, fit the piston 34 7849.
Malossi cylinder kit for APRILIA GULLIVER 50 2T. If the crankshaft has a Ø 12 pin, fit the piston 34 7849.
Malossi cylinder kit for APRILIA...
Malossi 5515740 strobe controller
Code: 5515740
This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many...
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm.
Spacer size 117.5 mm.
Ohvale Gp-0 Evo Gp-2 seat support frame. Ohvale code: 03.TE.0003.L
Seat support frame compatible with Ohvale Gp-2 and Ohvale Gp-0 110 4S EVO and 160 EVO.
Motocross Lem M5 21/18 inch 250cc.
250cc 4-stroke single cylinder Air Cooled engine.
Fuel tank capacity 6,5lt unleaded petrol.
CDI ignition.
Pedal start + electric ignition
5-speed manual gearbox type
high resistance handlebar with racing pad
aluminum rims
Motorcycle dimensions 212x81x97cm saddle height
Average weight 118kg
Wheel 21/18
Front hydraulic...
Malossi Multivar 51 9988 variator
Code: 51 9988
Malossi Multivar variator for scooters.
Multivar is very simple to apply and easy to operate.
It is studied in every detail and tested on each specific application.
With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in gear, even at high...
Malossi rear shock absorber Rs24 wheelbase 285 mm 4612949
Malossi code: 4612949
Malossi rear shock absorber Rs24, wheelbase 285 mm for 10" wheel.
Technical features
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: Racing scooter.
-Shock absorber rod Ø 14 mm in 38 NiCrMo4UNI 7845 steel - hardened and tempered with hard chrome...
Malossi Force Master 2 5518172 electronic control unit
Code: 5518172
The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders.
Carburation adjustment
± 20% at min/average/max
Rev limiter : + 1000 RPM
Original 10,000 - Malossi 11,000
4 different mappings :
curve 0 : Malossi exhaust with...
Malossi Gp mhr exhaust 3219097.K0 replica 4 stroke for Yamaha approved
Code: 3219097.K0
The new range of mhr REPLICA mufflers has been designed with CAD and defined for each type of scooter and motorcycle 50. After very strict tests in the Malossi Engineering test rooms, equipped with the most modern and sophisticated equipment, the engineers of the...