Xmotorstore Payments
PIN 8×14×7 Ohvale 110 A
Code: 01.SB.0203.L
Reference: 01.SD.0213.L
Brand: Ohvale
Ohvale Seal valve steam d.4.5 Code: 01.SD.0213.L
Reference: 209.0399
Brand: POLINI
Polini gaskets series diameter 40 mm 209.0399 Polini gaskets set for: Aprilia, Aprilia Scarabeo 50, Aprilia Mojito 50, Gilera, Gilera Easy Moving 50, Gilera Ice 50, Gilera Stalker 50, Gilera Storm 50, Gilera Typhoon 50, Italjet, Italjet Torpedo 50, Peugeot, Peugeot Buxy 50, Peugeot Elyseo 50, Peugeot Looxor 50, Peugeot Metal, Peugeot Metal x 50, Peugeot...
Reference: 29 7456
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 29 7456 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: 203.0173
Brand: POLINI
Polini air filter for Honda Wallaroo 50. Polini code: 203.0173. The Polini Original Air Filters are made of high efficiency flexible polyurethane foam with a cross-linked polyester base. Polini air filters for Honda and Peugeot mopeds are composed of two layers of sponge; a finer one of light blue color with porosity of 60 PPI and a more open one of black...
Reference: 6119959B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley with d.116 Malossi code: 6119959B Malossi half-pulley for KL Brera 125 ie 4T euro 5 2022. Malossi half-pulley for Peugeot Tweet 125 ie 4T euro 5 2023. Malossi half-pulley for Sym Jet 14 125 ie 4T LC euro 4 2018-2020. Malossi half-pulley for Sym Jet 14 125 ie 4T LC euro 5 2021. Malossi half-pulley for Sym Jet X 125 ie 4T...
Reference: 3562.03-01
Brand: Domino
Domino throttle control with air enrichment and knobs 3562.03-01 Aluminum gas control with air enrichment and with black knobs. With right knob overprinted on the tube. Support material: Aluminum Support finish: Painted Black colour Max travel: 57 mm Rapidity: 1,9 ° / mm Cable Type: Single cable
Reference: 211.0324
Brand: POLINI
Polini engine head for Piaggio 100cc. Head for engine 100cc Piaggio Zip h2o evolution p.r.e. Polini Code: 211.0324
Reference: 5512341
Brand: Malossi
Malossi digitronic digital electronic control unit for vehicles with immobilizer 5512341. DIGITRONIC for 4-stroke engines. Digital electronic control unit with mapping memory system on microprocessor. Raising the rev limiter by 500. Ignition advance mapping controlled by 16 break-points, to perfectly adapt to Malossi and original 4 stroke cylinders....
Reference: GHR 034.002
Brand: GHR
G-Radius black plate adjustment kit (wheel with movable pin and pusher)
Reference: 5516955
Brand: Malossi
Malossi Vespower ignition with 20 mm diameter cone Malossi Code: 5516955 Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel Complete ignition line for the entire vintage Vespa range with gears. To allow a perfect and easy installation, a specific version has been studied for each model. The ignition is distinguished by: - Lightened...
Reference: 29 7306
Brand: Malossi
Malossi clutch spring set only for vehicles without variator for Italjet and Piaggio Malossi code: 29 7306 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a paint in various colors with high heat resistance. The different color highlights the load of each set of springs.
Reference: GHR 016.001
Brand: GHR
GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...
Reference: 190.0077
Brand: POLINI
Polini stainless steel muffler for Vespa Gts 300 4t euro 5 from 2020. Polini code: 190.0077 Approved for: Vespa 300 Euro 5 - MD31M European homologation norm 97/24 / EC chap. 9
Reference: A2151
Brand: Alfano
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label". This K thermocouple technology sensor must be installed on the exhaust pipe. Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 253.0120
Brand: POLINI
Gasket reed valve Vespa double intake 253.0120
PIN 8×14×7 Ohvale 110 A
Code: 01.SB.0203.L
