Ohvale Bolt M6x23 110 4S 01.SZ.0122.L

Reference: 5518931B

Brand: Malossi

Lambda O2 Malossi controller 5518931B emulator

Lambda O2 Malossi controller 5518931B emulator Code: 5518931B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...

Reference: 4613185

Brand: Malossi

Pair of Malossi rear shock absorbers for Vespa 322 mm 4613185

Pair of Malossi rear shock absorbers for 322 mm Vespa. Malossi code: 4613185. Type: oil-pneumatic shock absorber. Road use. Shock absorber rod 12 mm in hardened and tempered C43 steel. Piston in steel and sintered bronze. New lamellar system in Swedish steel. LUBRIFLON-PTFE B70 piston guide shoe (bronze loaded modified compound). Sliding on GUIDA DU bush...

Reference: 03.RA.0003.L

Brand: Ohvale

Ohvale Tubeless valve 90 aluminum Till 2022 03.RA.0003.L

Ohvale Tubeless valve 90° aluminum Till 2022 Code: 03.RA.0003.L

Reference: 01.OT.0106.L

Copper washer 12x18x1.5 Ohvale GP-0 GP-2 01.OT.0106.L

Copper Washer 12x18x1.5 Ohvale GP-0 GP-2. Ohvale code: 01.OT.0106.L

Reference: 1610870

Brand: Malossi

Malossi sha 13 fuel system for Piaggio Ciao Px 50cc 1610870

Malossi sha 13 fuel system for Piaggio Ciao Px 50cc 1610870 Malossi code: 1610870 Application: Malossi fuel system for Piaggio Ciao px 50 2t

Reference: 0413527

Brand: Malossi

Malossi Red Filter air filter diameter 42/50/60 mm 0413527

Malossi Red Filter air filter diameter 42/50/60 mm 0413527 Code: 0413527 Malossi Red Filter E13 air filter inclined 25 ° for Phbh, Mikuni, Keihin carburetors. Diameter 42/50/30 mm

Reference: 143.070.002

Brand: POLINI

Minimoto carter engine 6,2 hp Polini 143.070.002

Pair of Polini 6.2 hp minibike engine casings. Polini code: 143.070.002

Reference: 215.0406

Brand: POLINI

Piaggio Zip intake manifold for original carburettor 215.0406

Piaggio Zip intake manifold for original carburettor. Polini Code: 215.0406

Reference: TCM163

Brand: Tecnominimoto

TCM minimoto muffler for 50 cc engines

TCM minimoto muffler for 50 cc engines. Tecnomoto minimoto muffler with non-decomposable manifold. Complete exhaust for minimoto with 50cc 2t water-cooled engine. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.

Reference: 204.0296/C

Brand: POLINI

Polini piston diameter 60 mm, selection C (59.955 mm) 204.0296/C

Polini piston diameter 60 mm, selection C (59.955 mm) 204.0296/C Polini piston for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125, Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm Derapage 125, Hm Cre...

Reference: 215.0246

Brand: POLINI

Motobecane 15-19 PHBG reed valve intake manifold 215.0246

Motobecane 15-19 PHBG reed valve intake manifold. Polini Code: 215.0246

Reference: 8001

Brand: STAMAS

Stamas steering head pin

Pin tube Stamas 

Reference: 241.735

Brand: POLINI

Polini Variator for Hi-speed Yamaha-Sym 241.735

Polini Variator for Hi-speed Yamaha-Sym 241.735 Code: 241.735 Variator supplied with two series of 25x15 12 gr. Rollers. and 14 gr. Application: Variator for Yamaha, Variator for Yamaha T Max 530, DX, SX i and E4 from 2017/560 Euro 5 from 2020, Variator for Sym, Variator for Sym Maxsym TL 500 from 2020 14 degrees

Reference: 215.0245

Brand: POLINI

Intake manifold motobecane 12-15 SHA 215.0245

Intake manifold motobecane 12-15 SHA. Polini Code: 215.0245

Reference: TCM32

Brand: Tecnominimoto

Bell carter Tcm For Carter Orioli

Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.

Reference: 215.0270

Brand: POLINI

Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50 215.0270

Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50, code 215.0270 Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL It is mounted on the crankcase with 3-hole attachment. Carburetor connection diameter 23 mm Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL