Xmotorstore Payments
Malossi front shock absorber Rs24 wheelbase 257 mm 4614615
Malossi code: 4614615
Malossi front Rs24 shock absorber, wheelbase 257 mm.
RS24 SHOCK ABSORBER
Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation.
-Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar system with leaf spring configuration
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (composite obtained by sintering a layer of spheroidal bronze on a suitably processed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+PB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Shock absorber rod Ø 14 mm in hardened and tempered 38NCD4 alloy steel with hard chrome deposit 25/30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
Malossi shock absorber for:
Malossi shock absorber for LML Star 125 2T.
Malossi shock absorber for LML Star Deluxe 125 4T (E25).
Malossi shock absorber for LML Star 150 2T.
Malossi shock absorber for LML Star Deluxe 150 4T (E25).
Malossi shock absorber for Vespa PX 125 2T euro 0-1.
Malossi shock absorber for Vespa PX 125 2T euro 2 (VLX2M).
Malossi shock absorber for Vespa PX 125 2T euro 3.
Malossi shock absorber for Vespa PX 150 2T euro 0-1.
Malossi shock absorber for Vespa PX 150 2T euro 2 (VLX2M).
Malossi shock absorber for Vespa PX 150 2T euro 3.
Malossi shock absorber for Vespa PX E 200 2T.
Malossi shock absorber for Vespa PX 80 2T.
Reference: 248.126
Brand: POLINI
Polini variator belt for Honda 125/150 PCX Polini variator belt for Honda 125/150 PCX from 2015 to 2017 Code: 248.126 Application: Honda, Honda Pcx 125 ie Euro 3/150 Euro 3
Reference: 5518588B
Brand: Malossi
Malossi Digitronic Mhr code 5518588B digital electronic control unit Malossi digital electronic control unit Digitronic Mhr Team with Trimmer. The MHR range is equipped with a non-remappable variable advance ECU.
Reference: 0.100.072.00
Brand: STAMAS
Minimoto Stamas Junior complete Midi version, SR Race Factory team model with air-cooled 40CC Cs Iame engine. Engine: Cs Racing 40cc race ready air cooled Steering damper: Adjustable Matris Brakes: Formula radial hydraulic Fairing: complete in resin (no paint) Tires: Pmt Junior
Reference: 143.246.001
Brand: POLINI
Rubber cap for Polini 910 minimoto tank cover. Polini code: 143.246.001
Reference: 248.066
Brand: POLINI
Polini variator belt for Piaggio Beverly 250 Aramid Application: Aprilia, Aprilia Scarabeo 300 Special ie, Aprilia Sportcity street 300, Peugeot, Peugeot Geopolis 250, Piaggio, Piaggio Beverly 250/300 ie Tourer / 300 ie / 300 ie E4, Peugeot Carnaby 250/300, Derbi, Derbi Rambla 125 / 250/300 ie
Reference: 6118068B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley with d.109 Malossi code: 6118068B Malossi half-pulley for Piaggio Liberty 3V 125 ie 4T euro 3. Malossi half-pulley for Piaggio Liberty iGet 125 ie 4T euro 4 2017-. Malossi half-pulley for Piaggio Liberty iGet 125 ie 4T euro 5 2021-. Malossi half-pulley for Piaggio Liberty iGet ABS 125 ie 4T euro 3. Malossi half-pulley...
Reference: Dm-D003
Brand: DM
Dm aluminum subframe for Ducati Hypermotard 796 and 1100 from 2007 to 2014. DM code: D003. This subframe is not approved for road use. This frame will be supplied raw, in silver color without painting. Material: High strength 7020 aluminium.
Reference: 01.CA.0047.L
Brand: Ohvale
Ohvale body screws kit. Ohvale code: 01.CA.0047.L Compatible kit for: Ohvale Gp-0 bodywork screws kit. Ohvale Gp-2 bodywork screws kit.
Reference: A2203
Brand: Alfano
Alfano speed sensor 195 cm. Code A2203. New model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and on the PROIIIevo (in the green connector), without the need to use the A2192 (old model) or A2194 Hub. This sensor can be used on the rear axle or the front wheel of the kart. Note: For those who need an extension cable to...
Reference: MC21SF
Brand: HJC
Hjc Rpha 12 Ottin helmet Premium Integrated Matrix / P.I.M. EVO: The reinforcement materials, including Carbon-Aramid Hybrid and natural fiber, guarantee better performance in terms of impact resistance, greater comfort and lightness of the helmet. Pinlock Ready HJ-42 VISOR: Offers 99% UV protection, anti-scratch coating; The two-way pin ratchet ensures...
Reference: 200.0413
Brand: POLINI
Polini exhaust for Rieju Mrt 50 cc. Polini Code: 200.0413. Muffler compatible with RIEJU: MRT, SUPERMOTARD AM6. The Polini muffler for Rieju 50 cc is installed on the right side (high version).
Reference: 01.CA.0055.G
Brand: Ohvale
Ohvale Gp-0 raw front fender. Ohvale code: 01.CA.0055.G Unpainted front mudguard, for Ohvale Gp-0 for all versions.
Reference: 243.079
Brand: POLINI
Polini contrast spring for Piaggio Beverly 350 Code: 243.079 Application: Piaggio, Piaggio X10 350 4T 4V ie E3, Piaggio Beverly 350 4V ie E3
Reference: 01.SB.1404.L
Brand: Ohvale
Ohvale Relay 110ZB Code: 01.SB.1404.L
Reference: 1610738
Brand: Malossi
Malossi phbl 25 bs fuel system for Vespa 50cc 1610738 Malossi code: 1610738 Malossi fuel system phbl 25 bs elastic to the crankcase for Vespa Special 50cc Application: Malossi fuel system for Vespa Special 50
Malossi front shock absorber Rs24 wheelbase 257 mm 4614615
Malossi code: 4614615
Malossi front Rs24 shock absorber, wheelbase 257 mm.
RS24 SHOCK ABSORBER
Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation.
-Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar system with leaf spring configuration
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (composite obtained by sintering a layer of spheroidal bronze on a suitably processed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+PB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Shock absorber rod Ø 14 mm in hardened and tempered 38NCD4 alloy steel with hard chrome deposit 25/30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
