- New

Xmotorstore Payments
Polini Air Speed Evolution self-ventilating half-pulley 12.5 degrees for Piaggio. Polini code: 244.0132
The Polini Air Speed Evolution self-ventilating half-pulley has been designed for all scooters equipped with Polini Evolution engine crankcases and for prepared Piaggio engines.
Made with an increased diameter of 115 mm and built in anodized aluminum alloy, it stands out for its aerodynamic shape of the reversed fins. This design aims to increase by 30 percent. the air flow in the transmission unit, especially at higher engine speeds, between 13 thousand and 15 thousand rpm.
Furthermore, it presents a reduction in the power absorbed by the shaft by 5 percent. This solution ensures that engine performance is always maintained at the highest level, while ensuring maximum efficiency.
Two versions available with different inclinations of 12.5 degrees and 14.
Polini Air Speed Evolution self-ventilating half-pulley 12.5 degrees for Piaggio. Polini code: 244.0132
The Polini Air Speed Evolution self-ventilating half-pulley has been designed for all scooters equipped with Polini Evolution engine crankcases and for prepared Piaggio engines.
Made with an increased diameter of 115 mm and built in anodized aluminum alloy, it stands out for its aerodynamic shape of the reversed fins. This design aims to increase by 30 percent. the air flow in the transmission unit, especially at higher engine speeds, between 13 thousand and 15 thousand rpm.
Furthermore, it presents a reduction in the power absorbed by the shaft by 5 percent. This solution ensures that engine performance is always maintained at the highest level, while ensuring maximum efficiency.
Two versions available with different inclinations of 12.5 degrees and 14.
Reference: 3112199
Brand: Malossi
Malossi MHR REPLICA cylinder kit diameter 40.3 in aluminum with pin diameter 12 H2O Malossi code: 3112199 Malossi cylinder kit for APRILIA MX 50 2T LC (MINARELLI AM 6). Malossi cylinder kit for APRILIA RS 50 2T LC (MINARELLI AM 3 6). Malossi cylinder kit for APRILIA TUONO 50 2T LC (MINARELLI AM 6). Malossi cylinder kit for BETA RR ENDURO 50 2T LC...
Reference: 31 7559
Brand: Malossi
Malossi MHR cylinder kit diameter 47 in aluminum with pin diameter 10 Malossi code: 31 7559 Malossi cylinder kit for APRILIA AMICO 50 2T. If the crankshaft has a Ø 12 pin, fit the piston 34 7849 (attention: 2 segments). Malossi cylinder kit for APRILIA SR 50 2T 1993. If the crankshaft has a Ø 12 pin, fit the piston 34 7849 (attention: 2 segments). Malossi...
Reference: 027
Brand: DM
Pair of DM swingarm adjusters from 2008 standard
Reference: 13 1012b
Brand: Malossi
Malossi sleeve for PHBE - PHF 30 - 34 carburetors (Height 35 cm) Malossi code: 13 1012b
Reference: 3219163
Brand: Malossi
Malossi SCOOTER RACING MHR BIG BORE exhaust diameter 52 Malossi code: 3219163 Malossi exhaust for Aprilia Area 51 50 2T LC. Malossi exhaust for Aprilia Gulliver 50 2T LC. Malossi exhaust for Aprilia Sonic 50 2T LC. Malossi exhaust for Aprilia SR Netscaper 50 2T LC Minarelli. Malossi exhaust for Aprilia SR Racing 50 2T LC Minarelli. Malossi exhaust for...
Reference: 4418921
Brand: Malossi
Malossi battery MTX9-BS gel 4418921 Code: 4418921 TECHNICAL FEATURES Ready to use, it does not require maintenance Factory Activated (VRLA) Waterproof Multi-position mounting Sulfation of the plate reduced to a minimum Suitable for cold climates No contact with acids Longer duration Compliant with European regulation 2021 Voltage 12
Reference: 55 8133
Brand: Malossi
Malossi Tc Unit 55 8133 electronic control unit Code: 55 8133 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody the utmost technology. Each control unit model has been expressly studied for the scooter on which...
Reference: 209.0380
Brand: POLINI
Polini gaskets set diameter 47 mm Polini gaskets series for Franco morini, Franco morini G 30, Franco morini G 303, Franco morini G 304, Malaguti, Malaguti Fifty 50 Top, Malaguti Mistral 50, Polini cylinder. Polini code: 209.0380
Reference: 3113958
Brand: Malossi
Malossi cylinder diameter 75.5 mm in aluminum with pin diameter 16 mm 4T. Malossi code: 3113958. Malossi cylinder for Piaggio 300 ie 4t euro 3 engine. Bore diameter 75.5mm. Stroke 63mm. 282 cubic capacity. Compression ratio 12.5:1. Material: primary aluminum alloy with high silicon content and hardened and tempered, barrel with silicon carbide coating in...
Reference: FM40064-10
Brand: Formula
Formula brake caliper repair kit for Ohvale KTM SX85 Husqvarna TC85 Rubber boot gaskets
Reference: 01.SZ.0308.L
Brand: Ohvale
Bolt M6x125 Ohvale 110 4S Code: 01.SZ.0308.L
Reference: 280.0030
Brand: POLINI
MOTOBECANE: 51POLINI: RICAMBI UNIVERSALI 16X42X13 C3
Reference: 11 7769b
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder for original head Malossi code: 11 7769b
Reference: MC1SF
Brand: HJC
Hjc C70N Holt helmet The C70N features an internal sun visor with an easy-slide manual lever mechanism. The advanced composite polycarbonate shell offers a lightweight helmet, with superior fit and comfort thanks to advanced CAD technology. The "ACS" Advanced Channeling Ventilation system allows full airflow from front to back to eliminate heat and humidity.
Reference: 55 9002
Brand: Malossi
Malossi Digitronic code 55 9002 digital electronic control unit Digital electronic Malossi control unit Digitronic EPROM MHR
Reference: 6115653B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6115653B
Polini Air Speed Evolution self-ventilating half-pulley 12.5 degrees for Piaggio. Polini code: 244.0132
The Polini Air Speed Evolution self-ventilating half-pulley has been designed for all scooters equipped with Polini Evolution engine crankcases and for prepared Piaggio engines.
Made with an increased diameter of 115 mm and built in anodized aluminum alloy, it stands out for its aerodynamic shape of the reversed fins. This design aims to increase by 30 percent. the air flow in the transmission unit, especially at higher engine speeds, between 13 thousand and 15 thousand rpm.
Furthermore, it presents a reduction in the power absorbed by the shaft by 5 percent. This solution ensures that engine performance is always maintained at the highest level, while ensuring maximum efficiency.
Two versions available with different inclinations of 12.5 degrees and 14.