- New

Xmotorstore Payments
Polini air filter for Honda Wallaroo 50. Polini code: 203.0173.
The Polini Original Air Filters are made of high efficiency flexible polyurethane foam with a cross-linked polyester base.
Polini air filters for Honda and Peugeot mopeds are composed of two layers of sponge; a finer one of light blue color with porosity of 60 PPI and a more open one of black color with porosity of 30 PPI.
The fine layer filters only the smaller particles, maintaining its characteristics for longer as they do not come into contact with the larger particles which have not passed the pre-filtration carried out by the primary layer. The external surface stands out for being corrugated, offering greater entry of air flows but at the same time retaining 50% more coarse dust.
Filter efficiency according to European Standards EN779 grade G3-G4; with weight efficiency greater than 90% and in particular more than 50% with particles of 1 micron. Greater capacity to retain dust is obtained by impregnating the filter with specific oil for sponge filters. Possibility to regenerate and clean the filter by washing and drying.
Polini air filter for Honda Wallaroo 50. Polini code: 203.0173.
The Polini Original Air Filters are made of high efficiency flexible polyurethane foam with a cross-linked polyester base.
Polini air filters for Honda and Peugeot mopeds are composed of two layers of sponge; a finer one of light blue color with porosity of 60 PPI and a more open one of black color with porosity of 30 PPI.
The fine layer filters only the smaller particles, maintaining its characteristics for longer as they do not come into contact with the larger particles which have not passed the pre-filtration carried out by the primary layer. The external surface stands out for being corrugated, offering greater entry of air flows but at the same time retaining 50% more coarse dust.
Filter efficiency according to European Standards EN779 grade G3-G4; with weight efficiency greater than 90% and in particular more than 50% with particles of 1 micron. Greater capacity to retain dust is obtained by impregnating the filter with specific oil for sponge filters. Possibility to regenerate and clean the filter by washing and drying.
Reference: 3217684
Brand: Malossi
Malossi RX Black exhaust approved for Vespa Primavera with catalytic converter Malossi code: 3217684.k0 Malossi exhaust for Vespa Primavera iGet 125 ie 4T euro 4 2016.
Reference: 178.1002
Brand: POLINI
Polini brake connection adapter screw m8x1 d.10 with o-ring. Polini code: 178.1002
Reference: 03.IF.0007.L
Brand: Ohvale
Ohvale front brake hose from 2022 Code: 03.IF.0007.L
Reference: 01.SB.0702.L
Brand: Ohvale
Ohvale Oil pump sprocket shaft Code: 01.SB.0702.L
Reference: 6215328
Brand: Malossi
Malossi brake pad Malossi code: 6215328 Malossi brake pad for Aprilia Mojito 125 4T rear for vehicles produced 1999. Malossi brake pad for Gilera Ice 50 2T rear for vehicles produced 2000. Malossi brake pad for Gilera Stalker 50 2T rear for vehicles produced 1997. Malossi brake pad for Gilera Typhoon 125 2T rear for vehicles produced 1995. Malossi brake...
Reference: 210.0064
Brand: POLINI
Polini crankshaft for Vespa 200 anticipated stroke 57 mm Polini crankshaft for: Vespa, Vespa 200 2T PE, Vespa 200 2T PX, Vespa 200 2T Cosa
Reference: 3219559
Brand: Malossi
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm Code: 3219559 Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic...
Reference: 6111703
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley Malossi code: 6111703 Malossi half-pulley for BENELLI VELVET 125 4T LC. Malossi half-pulley for BENELLI VELVET 150 4T LC YAMAHA. Malossi half-pulley for ITALJET JUPITER 125 4T LC. Malossi half-pulley for ITALJET JUPITER 150 4T LC. Malossi half-pulley for ITALJET MILLENNIUM 125 4T LC. Malossi half-pulley for ITALJET...
Reference: 5007
Brand: STAMAS
Rear hub Stamas standard / factory including spacer and bearings
Reference: 7719308B
Brand: Malossi
Malossi Maxi wing finned clutch bell 7719308B Malossi code: 7719308B. Malossi Maxi Wing finned clutch bell. Internal diameter 134 mm. Weight 993 grams. The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from...
Reference: 143.270.011
Brand: POLINI
Minimoto rubber intake manifold, straight steel model. Polini Code: 143.270.011
Reference: 01.IF.0095.L
Brand: Ohvale
Bellow L Ohvale Code: 01.IF.0095.L
Reference: 280.0017
Brand: POLINI
Polini pin cage dimensions 10x14x13 mm. Polini code: 280.0017
Reference: 211.0130
Brand: POLINI
Polini head for Piaggio Ape and Vespa 50cc 2t from 38.4 to 42mm. Polini code: 211.0130
Reference: 1115631
Brand: Malossi
Complete Malossi gasket kit for 57.5 diameter cylinder kit for Vespa ET3 - ETS - PK 125 Malossi code: 1115631
Reference: 3216365
Brand: Malossi
Malossi Gp mhr exhaust 3216365 replica 4 stroke approved for Honda Code: 3216365 Thanks to the strengthening of Malossi's technical staff (equipped with very modern laboratories) and to the many years of experience in the world of competitions, Malossi wanted to make the difference, giving as an imperative for the design of the new GP MHR REPLICA 4-Stroke...
Polini air filter for Honda Wallaroo 50. Polini code: 203.0173.
The Polini Original Air Filters are made of high efficiency flexible polyurethane foam with a cross-linked polyester base.
Polini air filters for Honda and Peugeot mopeds are composed of two layers of sponge; a finer one of light blue color with porosity of 60 PPI and a more open one of black color with porosity of 30 PPI.
The fine layer filters only the smaller particles, maintaining its characteristics for longer as they do not come into contact with the larger particles which have not passed the pre-filtration carried out by the primary layer. The external surface stands out for being corrugated, offering greater entry of air flows but at the same time retaining 50% more coarse dust.
Filter efficiency according to European Standards EN779 grade G3-G4; with weight efficiency greater than 90% and in particular more than 50% with particles of 1 micron. Greater capacity to retain dust is obtained by impregnating the filter with specific oil for sponge filters. Possibility to regenerate and clean the filter by washing and drying.