- New

Xmotorstore Payments
Cs muffler exhaust fitting springs.
Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold.
Attention: pair of springs, specific for Cs minibike muffler.
Total spring length 35 mm.
Unloaded spring length (L0) 32 mm.
Spring length without eyelet (Lk) 17 mm.
External diameter of the coils (De) 10 mm.
Wire diameter (d) 1 mm.
Cs muffler exhaust fitting springs.
Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold.
Attention: pair of springs, specific for Cs minibike muffler.
Total spring length 35 mm.
Unloaded spring length (L0) 32 mm.
Spring length without eyelet (Lk) 17 mm.
External diameter of the coils (De) 10 mm.
Wire diameter (d) 1 mm.
Reference: 228.0001
Brand: POLINI
Long exhaust muffler spring (70mm) 228.0001
Reference: 228.0003
Brand: POLINI
Long muffler spring with 90 ° hooks (72mm). Code: 228.0003
Reference: IMA-20502
Brand: CS Racing
Iame exhaust gasket for flange 10 12 15. Cs exhaust gasket. ATTENTION: PACK OF 1 PIECE.
Reference: IMH-02051
Brand: CS Racing
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange. Cs flange measurements: Center distance of cylinder attachment holes 47 mm Screw connection hole 6.5 mm Manifold connection 28 mm Base plate thickness 4 mm...
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: 01.SE.0208.L
Brand: Ohvale
Stainless steel TCEI M4x8 screw for Ohvale Gp-0 Gp-2. Ohvale Code: 01.SE.0208.L TCEI M4x8 STAINLESS STEEL screw.
Reference: 241.746
Brand: POLINI
Hi-Speed variator Yamaha Aerox 50 4T Euro 4 '18 Code: 241.746 Application: Yamaha Aerox 50 4T R LC ie E4 variator from 2018, Yamaha Neo'S 50 4T LC ie E4 variator from 2018 Variator supplied with a series of rollers 16x13 gr.4,9
Reference: 3118556
Brand: Malossi
Malossi cast iron cylinder kit diameter 43 with 12 CVF diameter pin Malossi code: 3118556 Malossi cylinder kit for PIAGGIO BOSS 50 2T. Malossi cylinder kit for PIAGGIO BOXER 50 2T. Malossi cylinder kit for PIAGGIO BRAVO 50 2T. Malossi cylinder kit for PIAGGIO GRILLO 50 2T. Malossi cylinder kit for PIAGGIO SI 50 2T. Malossi cylinder kit for PIAGGIO...
Reference: Batteria-K2RE
Brand: Arianetech
Ariane K2re electric minibike battery. Removable and interchangeable battery weighing 8 kg, capable of maintaining maximum power for 40 minutes offering full power. With the optionally available quick charger, it is fully charged in just 15 minutes. With the standard charger in two hours. This way, you have absolutely no limitations when it comes to...
Reference: 244.116
Brand: POLINI
Fixed half-pulley Yamaha Majesty 250 cc 4t. Polini Code: 244.116
Reference: 209.0234
Brand: POLINI
Honda gasket set Honda gasket set for: Honda, Honda Nsr 125, Polini
Reference: A2203
Brand: Alfano
Alfano speed sensor 195 cm. Code A2203. New model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and on the PROIIIevo (in the green connector), without the need to use the A2192 (old model) or A2194 Hub. This sensor can be used on the rear axle or the front wheel of the kart. Note: For those who need an extension cable to...
Reference: G4005
Brand: GIMOTO
Motorcycle gloves Gp7 Gimoto Motorcycle gloves in kangaroo leather and/or sheepskin, composed of preformed carbon on the knuckles and little finger and an external finger seam. Motorcycle gloves made of anti-abrasion material in aramid fiber.
Reference: 215.0233
Brand: POLINI
Intake manifold Vespa Pk 3 holes carburetor cp. Polini Code: 215.0233 VESPA: VESPA 125 2T PK - VESPA 125 2T XL - VESPA 125 2T ETS - VESPA 50 2T HP, FL2 - VESPA 50 2T PK - VESPA 50 2T XL Can be combined with the Polini CP Ø 24 carburettor cod. 201.2402
Reference: 01.SD.0626.L
Brand: Ohvale
Ohvale Spring lever clutch Code: 01.SD.0626.L
Reference: 06 8826
Brand: Malossi
Malossi O-ring diameter 98x101.61x1.78 mm for heads diameter 40 - 47 - 47.6 Malossi code: 06 8826
Reference: 82635R
Original Piaggio oil filter for 125cc 150cc 200cc 250cc 300cc engines
Reference: 209.0312
Brand: POLINI
Gasket set for Motobecane h2o diameter 39 mm 209.0312 Polini gasket set for: Motobecane, Motobecane 51, Motobecane 92GT, Motobecane M16, Polini Code:209.0312
Reference: 174.0010
Brand: POLINI
Polini for race brake pads Code: 174.0010 Application: universal
Reference: 203.0054
Brand: POLINI
Long Polini 90 degree air box. Available in the variants: 203.0054 filter for Phbg, measures: 34x130x80 203.0056 filter for Phva, measures: 38x125x80
Reference: 01.SZ.0306.L
Brand: Ohvale
Ohvale Bolt M6x55 Code: 01.SZ.0306.L
Cs muffler exhaust fitting springs.
Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold.
Attention: pair of springs, specific for Cs minibike muffler.
Total spring length 35 mm.
Unloaded spring length (L0) 32 mm.
Spring length without eyelet (Lk) 17 mm.
External diameter of the coils (De) 10 mm.
Wire diameter (d) 1 mm.