- Reduced price
- New

Xmotorstore Payments
Polini hi-speed e-bike bosch smart system 950.830.049
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
Polini hi-speed e-bike bosch smart system 950.830.049
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
Reference: 3114700
Brand: Malossi
Malossi cylinder kit diameter 75.5 in aluminum with pin diameter 16 H2O 4 - stroke Malossi code: 3114700 Malossi cylinder kit for Aprilia Atlantic S 300 ie 4T LC euro 3 (Piaggio). Malossi cylinder kit for Aprilia Scarabeo Special 300 ie 4T LC euro 3 (Piaggio M28RM). Malossi cylinder kit for Aprilia Sportcity Cube 300 ie 4T LC euro 3 (Leader M28LM)....
Reference: Full-Zone-Vision
Brand: CAPIT
Capit Full Zone Vision Motorcycle Tyre Warmers The Capit Full Zone Vision Pro motorcycle tyre warmers were developed directly from the world of MotoGP, now also offered to an audience of non-professional riders. Extremely high performance for this top of the range Capit tyre warmer which, thanks to the “Full Zone” extension, is able to heat not only the...
Reference: 3112044
Brand: Malossi
Malossi I - TECH cylinder kit diameter 47 in cast iron with pin diameter 12 H2O Malossi code: 3112044 Malossi cylinder kit for APRILIA SR DITECH GP1 50 2T LC (PIAGGIO C361M). The use of spark plug 6312594 is recommended. Malossi cylinder kit for APRILIA SR R FACTORY 50 2T LC (PIAGGIO C361M). The use of spark plug 6312594 is recommended. Malossi cylinder...
Reference: 3413706.20
Brand: Malossi
Pair of Malossi oversized forged 4T pistons for Yamaha T Max 3413706 Malossi code: 3413706. Pair of Malossi oversized forged 4T pistons, diameter 66 mm, with 15 mm diameter pin and 3 rectangular segments for original cylinder, for Yamaha T Max. Forged pistons: in special aluminum alloy (copper sil.), hardened and tinned, shaped crown with valve...
Reference: 01.SB.0907.L
Brand: Ohvale
Ohvale Oil drain plug Code: 01.SB.0907.L
Reference: 6116101
Brand: Malossi
Malossi X K belt strap for maxi scooter 22x9.3x832 mm angle 28 Malossi code: 6116101 Malossi belt for BENELLI VELVET 125 4T LC. Malossi belt for BENELLI VELVET 150 4T LC (YAMAHA). Malossi belt for ITALJET JUPITER 125 4T LC. Malossi belt for ITALJET JUPITER 150 4T LC. Malossi belt for ITALJET MILLENNIUM 125 4T LC. Malossi belt for ITALJET MILLENNIUM 150 4T...
Reference: 1112547B
Brand: Malossi
Complete Malossi gasket kit for 74 diameter cylinder for original head Malossi code: 1112547B
Reference: 6215012BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215012BS Malossi brake pads for DERBI GPR RACING 50 2T LC <-2003 (EBE050 - EBS050) Front APPROVED Malossi brake pads for YAMAHA CYGNUS X 125 4T Front APPROVED
Reference: Kondor250ccLem
Brand: Lem motor
Quad Lem Kondor 250cc 4t. Quad Kondor 125cc, the new concept of sports quad with racing engine, 10 '' inch giant wheel, increased exhaust, reinforced frame, perfect for any type of route. ATTENTION: This vehicle is not approved for road traffic! 4-stroke single-cylinder engine with reverse gear Displacement 250cc Carburetor power supply Tank capacity...
Reference: 01.SE.0202.L
Brand: Ohvale
Fuel tank support Code: 01.SE.0202.L
Reference: 204.0829/D
Brand: POLINI
Polini piston diameter 50 mm selection D (49.975 mm) Polini piston for: Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 DRD SM, Derbi Senda 50 DRD, Derbi SM, Derbi Senda 50 Extreme, Derbi Senda 50 Extreme SM, Derbi Senda 50 R, Gilera, Gilera...
Reference: 370.0000
Brand: POLINI
Set of 10 maximum jets Cp - Keihin - Pwk. The Polini jets kit consists of 10 jets. Polini Code: 370.0000 370.0000 Set of 10 maximum jets Cp - Keihin - Pwk from 40 TO 58 370.0001 Set of 10 maximum jets Cp - Keihin - Pwk from 60 TO 78 370.0002 Set of 10 maximum jets Cp - Keihin - Pwk from 80 TO 98 370.0003 Set of 10 maximum jets Cp - Keihin - Pwk from 100...
Reference: 9002
Brand: STAMAS
Pair of Stamas standard radiator support brackets.
Reference: 206.0380
Brand: POLINI
Polini segment diameter 39.88 mm chromed Polini segment for: Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 SM, Gilera, Gilera SMT 50, Gilera RCR 50, Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Valenti racing, Valenti racing RME, Valenti racing SM For Cast Iron Cylinder
Reference: 6111813B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6111813B Half-pulley in silicon aluminum alloy machined with extremely precise CNC machines and diamond finishing, with recalculated profile of the roller sliding tracks.
Reference: 01.SB.0204.L
Brand: Ohvale
Ohvale Rectangle ring 14×18.2×2.5 Code: 01.SB.0204.L
Polini hi-speed e-bike bosch smart system 950.830.049
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.