- Reduced price
- New

Xmotorstore Payments
Polini thermal unit for Vespa and Piaggio Liberty 125 and 150 4T EURO 5. Polini code: 140.0235
Polini cylinder kit diameter 63 for Vespa 125 and 150 4T and Piaggio Liberty 125 and 150 EURO 5.
The Polini Motori Ø 63 cylinder kit has been studied and designed to give an injection of power to the Vespa 125 and 150 4T. The increased displacement was increased to 182cc. and allows you to give greater sprint and increase performance. The compression ratio is 11.5:1, the casting is in aluminum with nicasil coating. Die-cast piston with chromed bands.
For a correct carburetion setting it is essential to fit the Polini ECU control unit for Vespa 125 and 150 4T - Piaggio Liberty 125 and 150 specific for Euro 5 code. 171.0018 with the thermal unit kit.
Polini thermal unit for Vespa and Piaggio Liberty 125 and 150 4T EURO 5. Polini code: 140.0235
Polini cylinder kit diameter 63 for Vespa 125 and 150 4T and Piaggio Liberty 125 and 150 EURO 5.
The Polini Motori Ø 63 cylinder kit has been studied and designed to give an injection of power to the Vespa 125 and 150 4T. The increased displacement was increased to 182cc. and allows you to give greater sprint and increase performance. The compression ratio is 11.5:1, the casting is in aluminum with nicasil coating. Die-cast piston with chromed bands.
For a correct carburetion setting it is essential to fit the Polini ECU control unit for Vespa 125 and 150 4T - Piaggio Liberty 125 and 150 specific for Euro 5 code. 171.0018 with the thermal unit kit.
Reference: 171.0018
Brand: POLINI
Polini ECU control unit for Vespa and Piaggio Liberty euro 5, for 125 and 150 cc. Polini code: 171.0018. Application: Polini ECU control unit for Vespa 125 euro 5. Polini ECU control unit for Vespa 150 euro 5. Polini ECU control unit for Piaggio Liberty 125 euro 5. Polini ECU control unit for Piaggio Liberty 150 euro 5. Polini Motori presents the Polini...
Reference: Graphics-kit-grc-rrz3-redbull
Brand: XRACING
Sticker graphics for Grc rrz3 Redbull. Adhesive graphics for Grc minimoto model Rrz3, very simple to apply as it is already adhesive in every point, it protects the paint from superficial scratches and wear. Possibility of modifications on request of the pilot number. The waiting time may vary depending on the modification requested.
Reference: 001002A00500
Brand: DM
Dm minimoto tank support pad (2 pieces).
Reference: 5313430
Brand: Malossi
Malossi Rhq crankshaft 5313430 for Polini minimoto Malossi code: 5313430 Malossi Rhq crankshaft with 10 mm diameter pin and 39.7 mm stroke for Polini water minimoto.
Reference: 202.1423
Brand: POLINI
Polini front wheel pin for Piaggio and Vespa Ean code: 8054705118197 The Polini wheel pin axle designed for Piaggio and Vespa scooters has been designed to be perfectly complemented with the Polini suspension arm code 050.2660, but can also be applied to original levers. It is made of induction hardened carbon steel with high surface hardness and is...
Reference: 01.FO.0013.L
Brand: Ohvale
Screw TE Ohvale M6x50 Code: 01.FO.0013.L
Reference: 01.SB.0802.L
Brand: Ohvale
Ohvale Bearing 6001 Code: 01.SB.0802.L
Reference: 11 2199
Brand: Malossi
Complete gasket kit for cylinder diameter 42 for original head for Puch Maxi 50 cc Malossi code: 11 2199
Reference: 03.MA.0023.L
Brand: Ohvale
Ohvale Domino clutch lever control. Ohvale code: 03.MA.0023.L Domino clutch lever compatible with Ohvale.
Reference: A2401
Brand: Alfano
Alfano steering wheel position sensor. Alfano Code A2401. 80cm FLYING position sensor. This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box12 / Box4Move.
Reference: 104097
Brand: Motul
Motul 7100 4T 10W-50 104097 oil. For high performance 4-stroke engines of sports motorcycles, road, trial, off-road, enduro, etc., with or without integrated gearboxes and wet and non-wet clutches. For engines compliant with the regulations relating to the regulation of polluting emissions, Euro 2, 3, 4 or 5 and equipped with exhaust gas post-treatment...
Reference: 6215037BS
Brand: Malossi
Malossi MHR Synt brake pads Malossi code: 6215037BS Malossi brake pads for APRILIA ATLANTIC 125 4T LC Front vehicles produced 2003-2005 APPROVED Malossi brake pads for APRILIA ATLANTIC 200 4T LC (PIAGGIO M234M) Front vehicles produced 2003-2005 APPROVED Malossi brake pads for APRILIA ATLANTIC 250 4T LC (PIAGGIO M237M) Front vehicles produced 2003...
Reference: 5515476B
Brand: Malossi
Stator for ignition Vespower Malossi 5515476B Code: 5515476B
Reference: 251.0038
Brand: POLINI
Head gasket Vespa Px 125 150 cc 251.0038
Reference: 244.0573
Brand: POLINI
APRILIA: SCARABEO 50 STREET 2T RESTYLING Piaggio - SR 50 R, FACTORY (Piaggio) LC - MOJITO 50 2T Piaggio - SR 50 R, FACTORY (Piaggio) LC EURO 4DERBI: GP1 50 2001-2003GILERA: DNA 50 - EASY MOVING 50 - RUNNER 50, SP, POGGIALI - STALKER 50 - STORM 50 - TYPHOON 50 fino al 1999PIAGGIO: DIESIS - EXTREM - EXTREM LC - FLY 50 2T - LIBERTY 50 2T - MC2 50 (1998) -...
Reference: 094
Brand: DM
Rear fairing DM in reinforced resin. The Dm minimoto saddle is designed to guarantee an ideal riding position, while maintaining an innovative design. Dm Code: 094
Reference: 1112449
Brand: Malossi
Complete Malossi gasket kit for 50 diameter cylinder kit (for Minarelli AM 3 > 6 engines) Malossi code: 1112449
Polini thermal unit for Vespa and Piaggio Liberty 125 and 150 4T EURO 5. Polini code: 140.0235
Polini cylinder kit diameter 63 for Vespa 125 and 150 4T and Piaggio Liberty 125 and 150 EURO 5.
The Polini Motori Ø 63 cylinder kit has been studied and designed to give an injection of power to the Vespa 125 and 150 4T. The increased displacement was increased to 182cc. and allows you to give greater sprint and increase performance. The compression ratio is 11.5:1, the casting is in aluminum with nicasil coating. Die-cast piston with chromed bands.
For a correct carburetion setting it is essential to fit the Polini ECU control unit for Vespa 125 and 150 4T - Piaggio Liberty 125 and 150 specific for Euro 5 code. 171.0018 with the thermal unit kit.