- Reduced price
- New

Xmotorstore Payments
Malossi Gp Mhr exhaust 3215202 replica 4 stroke approved for Ktm Duke
Code: 3215202
Thanks to the strengthening of Malossi's technical staff (equipped with very modern laboratories) and to the many years of experience in the world of competitions, Malossi wanted to make the difference, giving as an imperative for the design of the new GP MHR REPLICA 4-Stroke mufflers: innovative design, performance, lightness, reliability and QUALITY.
Technical features
European approval
Stainless steel barrel with laser marking, elliptical section
Carbon terminals
Soundproofing system with the addition of mineral fibers with high soundproofing anti-decay power
Complete with DB killers
Exhaust pipes from the cylinder or to the muffler, in stainless steel.
The final assembly of the components using clamps and sealing rivets in stainless steel, gives the exhaust great mechanical resistance and eliminates any dispersion of the exhaust gases.
The GP mhr REPLICA 4-Stroke mufflers are supplied complete with attachments, screws, clamps, gaskets and anything else that may be needed for the relative assembly.
Malossi exhaust for:
3215202 MALOSSI EXHAUST GP MHR REPLICA 4 - STROKE APPROVED KTM DUKE 125 IE 4T LC
3215202 MALOSSI EXHAUST GP MHR REPLICA KTM DUKE 125 IE 4T LC APPROVED
Reference: 3212211
Brand: Malossi
Malossi Gp Mhr exhaust 3212211 Code: 3212211 The racing muffler born on the track for the track. It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs. Malossi trophies are raced all over the world according to precise formulas, which foresee by...
Reference: 01.CA.0020.L
Brand: Ohvale
Ohvale Cover tank fixing washer Code: 01.CA.0020.L
Reference: 143.800.072
Brand: POLINI
Front left disc cover for Polini 910 RS minimoto. Polini Code: 143.800.072 Polini S and RS minimoto front disc protection.
Reference: PERLA WHITE
Brand: HJC
Hjc C70N helmet The C70N features an internal sun visor with an easy-slide manual lever mechanism. The advanced composite polycarbonate shell offers a lightweight helmet, with superior fit and comfort thanks to advanced CAD technology. The "ACS" Advanced Channeling Ventilation system allows full airflow from front to back to eliminate heat and humidity
Reference: 6218043BS
Brand: Malossi
Malossi MHR Synt brake pads Malossi code: 6218043BS Malossi brake pads for KYMCO AK 550 ie 4T LC euro 4 2017-2020 (SAA1) Front. Malossi brake pads for KYMCO AK 550 ie 4T LC euro 5 2021- (SBA1) Front. Malossi brake pads for KYMCO AK Premium 550 ie 4T LC euro 5 2023- (SBA1B) Front.
Reference: 3218452b
Brand: Malossi
Malossi GP MHR REPLICA 4T naked exhaust Malossi code: 3218452b
Reference: EK520H 120
Brand: EK (Enuma Chain)
Motorcycle chain EK520H 120 links size 520. Ek chain code: EK520H 120
Reference: 243.104
Brand: POLINI
Polini contrast spring for Evo slider Yamaha diameter 3.8 mm evolution Code: 243.104 Application: Adly, Adly ATV 50, Aeon, Aeon Cobra 50/90, Aprilia, Aprilia Amico 50, Aprilia Area 51, Aprilia Gulliver 50/50 Lc, Aprilia Rally 50/50 Lc, Aprilia Sonic 50/50 GP, Aprilia SR 50 2T mod. 1993/50 2T mod. 94, 95, 96 H2O / 50 2T LC Stealth / 50 2T mod. 94, 95, 96...
Reference: 174.0099
Brand: POLINI
Original Polini brake pads 42.9x85.3x8.2 mm - 41x71.6x8.2 mm Code: 174.0099 Application: Cagiva, Cagiva City 50, Sym, Sym Jet 50/50 4T, Sym Fiddle II 50 4T / 125/150, Sym Symphony 50 4T / 50 4T S, Sym Symply 50 4T, Sym HD 200 ie / 125, Sym Citycom 300, Sym Symply II 50 4T, Peugeot, Peugeot Tweet 125/150 4T
Reference: 170.0301
Brand: POLINI
Yamaha / Minarelli / Mbk transmission gear cover, code 170.0301 Transmission gear cover for: Aprilia, Aprilia Amico 50, Aprilia Area 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Beta , Beta Ark 50, Beta Quadra 50, Beta Eikon 50, Beta Tempo 50,...
Reference: 51 7123
Brand: Malossi
Malossi Multivar 51 7123 variator Code: 51 7123 Malossi Multivar variator for Peugeot 103 rcx and spx 50cc. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in...
Reference: 01.SB.1001.L
Brand: Ohvale
Ohvale Piston ring complete Code: 01.SB.1001.L
Reference: A2194
Brand: Alfano
2-input hub for Alfano 6 A2194. HUB with 2 inputs: speed plus magnetic 20cm. New model, this A2194 Hub replaces the old A2192 model. This HUB allows you to simultaneously connect an A2201 speed sensor (old model) or the A2203 (new model) + an A1302 magnetic sensor Note: this HUB is specially designed to connect to the green connector of the PROIIIevo,...
Reference: 140.0232
Brand: POLINI
Polini cylinder for Vespa 200 Pe Px. Polini code: 140.0232 . The Polini cylinder with a diameter of 68.5 and a stroke of 60mm. it allows to increase the displacement to 221cc, made of aluminum it allows to better dispose of the heat by lowering the operating temperature in the most demanding uses. The Polini cylinder for Vespa has been revisited by...
Reference: 204.0829/C
Brand: POLINI
Polini piston diameter 50 mm selection C (49.965 mm) Polini piston for: Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 DRD SM, Derbi Senda 50 DRD, Derbi SM, Derbi Senda 50 Extreme, Derbi Senda 50 Extreme SM, Derbi Senda 50 R, Gilera, Gilera...
Reference: 11 3143
Brand: Malossi
Complete Malossi gasket kit for 45.5 diameter cylinder for original head Malossi code. 11 3143
Malossi Gp Mhr exhaust 3215202 replica 4 stroke approved for Ktm Duke
Code: 3215202
Thanks to the strengthening of Malossi's technical staff (equipped with very modern laboratories) and to the many years of experience in the world of competitions, Malossi wanted to make the difference, giving as an imperative for the design of the new GP MHR REPLICA 4-Stroke mufflers: innovative design, performance, lightness, reliability and QUALITY.
Technical features
European approval
Stainless steel barrel with laser marking, elliptical section
Carbon terminals
Soundproofing system with the addition of mineral fibers with high soundproofing anti-decay power
Complete with DB killers
Exhaust pipes from the cylinder or to the muffler, in stainless steel.
The final assembly of the components using clamps and sealing rivets in stainless steel, gives the exhaust great mechanical resistance and eliminates any dispersion of the exhaust gases.
The GP mhr REPLICA 4-Stroke mufflers are supplied complete with attachments, screws, clamps, gaskets and anything else that may be needed for the relative assembly.