Xmotorstore Payments
Malossi Flip exhaust approved 3216988
Code: 3216988
Expansion MUFFLER in special steel sheet (thickness 1.5 mm), obtained with molding processes. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish.
Regenerable aluminum SILENCER.
Malossi exhaust for:
3216988 MALOSSI FLIP EXHAUST APRILIA SR MOTARD 50 2T EURO 2 APPROVED
3216988 MALOSSI FLIP EXHAUST DERBI VARIANT SPORT 50 2T APPROVED
3216988 MALOSSI FLIP EXHAUST PIAGGIO TYPHOON 50 2T EURO 2 from 2011 to 2017 (C421M) APPROVED
Reference: SCR.0290
Brand: CS Racing
Cs curve for 40cc and 50cc h2o engines
Reference: 5518429
Brand: Malossi
Malossi Force Master electronic control unit 0 code 5518429 Malossi Force Master 0 electronic control unit The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 6% at min/average/max Rev limiter: +1,700 RPM Original 8,800 - Malossi 10,500 (*) 3 different mappings...
Reference: 02 6115B
Malossi inclined 20x24 mm intake manifold 02 6115B Code: 02 6115B Malossi inclined intake manifold
Reference: 01.SZ.0709.L
Brand: Ohvale
Ohvale Crankshaft connecting rod assy Code: 01.SZ.0709.L
Reference: 01.MA.0013.L
Brand: Ohvale
Gas cable Ohvale Gp-0 110 Automatic. Ohvale code: 01.MA.0013.L
Reference: 6215026BB
Brand: Malossi
Malossi brake pads Malossi code: 6215026BB Malossi brake pads for YAMAHA MAJESTY 400 4T LC up to 2008. Rear. Malossi brake pads for YAMAHA MAJESTY 400 4T LC euro 3 from 2009. Rear. Malossi brake pads for YAMAHA T MAX 500 ie 4T LC 2004-2007. Rear. Malossi brake pads for YAMAHA T MAX 500 ie 4T LC 2008-2011. Rear.
Reference: 242.382
Brand: POLINI
Polini rollers 24x18 pieces 6. Available: 242.190 ROLLS 24X18 GR.22.5 242.382 ROLLS 24X18 GR.18,0 242.383 ROLLS 24X18 GR.19,0 242.189 ROLLS 24X18 G. 29.6
Reference: A4100
Brand: Alfano
I.R. transmitter Alfano A4100. This coded infrared transmitter is used to operate the infrared receiver Item A1401 to take the times. It is connected to a 12 volt direct current source.
Reference: 204.0296/A
Brand: POLINI
Polini piston diameter 60 mm, selection A (59.935 mm). Polini code: 204.0296/A Polini piston for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125, Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm...
Reference: 61 7222
Brand: Malossi
X Special Malossi belt for Piaggio Grillo variator 50 cc 13x6.5x1089 mm angle 34 Malossi code: 61 7222 Malossi belt for Piaggio Grillo 50 2T
Reference: IM 07021C4
Brand: C4
Crankshaft Peugeot Ludix 50cc pin 12 mm
Reference: 4516053
Brand: Malossi
Malossi Sport windshield for Honda Sh 4516053 Malossi code: 4516053. Dark smoke colored screen. Length 47.8 cm. Height 36.7 cm. Thickness 0.3 cm.
Reference: 363.0002
Brand: POLINI
Set of 5 Polini jets for Delloro Si. Kit of 5 jets for: VESPA: 150 2T PX, SPRINT VELOCE - 125 2T PX - 200 2T PE, PX - 125 2T TS - 125/150 2T COSA - 200 2T COSA. DELLORTO: YES MAXIMUM/MINIMUM JET d.4 mm. Available: 363.0002 SET OF 5 JETS MASSIMO DELLORTO SI FROM 110 TO 122. 363.0003 SET OF 5 JETS MASSIMO DELLORTO SI FROM 125 TO 137. 363.0004 SET OF 5 JETS...
Reference: 01.FA.0014.L
Brand: Ohvale
Ohvale cable clip with screw. Ohvale Code: 01.FA.0014.L
Reference: 3212665
Brand: Malossi
Malossi Gp mhr exhaust 3212665 replica for Aprilia approved Code: 3212665 After stringent tests in the Malossi test rooms, equipped with the most modern and sophisticated equipment, the engineers of the study and research department were able to improve the vehicle's performance in compliance with the regulations. The GP mhr REPLICA mufflers are aimed at...
Reference: 6619636
Brand: Malossi
Set of 21 bearing rollers diameter 2x11.8 mm Malossi for Vespa 6619636 Malossi code: 6619636
Malossi Flip exhaust approved 3216988
Code: 3216988
Expansion MUFFLER in special steel sheet (thickness 1.5 mm), obtained with molding processes. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish.
Regenerable aluminum SILENCER.
