- Reduced price
- New
![](https://www.xmotorstore.com/15806-large_default/crankshaft-mhr-team-with-pin-13-connecting-rod-90-and-stroke-44-mm-5317822.jpg)
Xmotorstore Payments
Mhr team crankshaft with 13 conrod 90 pin and 44 mm stroke. Malossi code: 5317822.
IMPROVEMENTS SINCE THE PREVIOUS VERSION:
10% more inertial mass.
Reinforced connecting rod to withstand higher loads.
Sprocket-side crankshaft increased driveshaft cross-sectional area by 10% resulting in increased strength.
Increased oil seal, drive side, from shaft diameter 19mm to 20mm, increasing shaft strength.
TECHNICAL FEATURES:
Half shaft material: 18 Ni Cr Mo5.
Half shafts and forged monolithic rotating masses.
Machining on high precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper plated, coupled to shaft with high speed precision roller bearing.
N.B.: INTERVENTIONS ON THE CRANKCASE, BORING.
ONLY COMBINE WITH thermal units 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345).
Mhr team crankshaft with 13 conrod 90 pin and 44 mm stroke. Malossi code: 5317822.
IMPROVEMENTS SINCE THE PREVIOUS VERSION:
10% more inertial mass.
Reinforced connecting rod to withstand higher loads.
Sprocket-side crankshaft increased driveshaft cross-sectional area by 10% resulting in increased strength.
Increased oil seal, drive side, from shaft diameter 19mm to 20mm, increasing shaft strength.
TECHNICAL FEATURES:
Half shaft material: 18 Ni Cr Mo5.
Half shafts and forged monolithic rotating masses.
Machining on high precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper plated, coupled to shaft with high speed precision roller bearing.
N.B.: INTERVENTIONS ON THE CRANKCASE, BORING.
ONLY COMBINE WITH thermal units 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345).
Reference: 250.029
Brand: POLINI
Polini clutch bell for Piaggio Gilera Evolution model diameter 160 mm Code 250.029 This Polini clutch bell is compatible as an original spare. Diameter: 160 mm Weight: 1351 gr Application: Aprilia, Aprilia Atlantic 400 Sprint / 500/500 Sprint, Aprilia Scarabeo 400/500, Gilera, Gilera Fuoco 500, Gilera Nexus 500, Malaguti, Malaguti Spider 500, Spidermax...
Reference: 01.SD.0213.L
Brand: Ohvale
Ohvale Seal valve steam d.4.5 Code: 01.SD.0213.L
Reference: 6219356B
Brand: Malossi
Malossi brake disc external diameter 256 - thickness 4.2 mm Malossi code: 6219356B Malossi brake disc for HONDA ADV 350 ie 4T LC euro 5 2021 Front. Malossi brake disc for HONDA FORZA 125 ie 4T LC euro 3 up to 2016 Front. Malossi brake disc for HONDA FORZA 125 ie 4T LC euro 4 2017-2020 Front. Malossi brake disc for HONDA FORZA 125 ie 4T LC euro 5 2021...
Reference: 11 4969b
Brand: Malossi
Complete Malossi gasket kit for cylinder diameter 45.5 for original head for Honda MBX - MTX R Malossi code: 11 4969b
Reference: 01.PE.0002.L
Brand: Ohvale
Ohvale footrest Gp-0 Gp-2 gear version. Ohvale code: 01.PE.0002.L Compatible original spare part for: Ohvale Gp-0 footpeg (gears). Ohvale Gp-2 footpeg (gears).
Reference: Hjc i20 Vena
Brand: HJC
Hjc i20 Vena helmet. The all-new HJC I20 has been designed to offer motorcyclists a different approach to the classic open face/half helmet. This street fighter inspired helmet features a removable goggle and WIDE VISION SUN VISORS WITH ANTI-FOG COATING (SMOKE AND CLEAR) that are manually operated with hook-and-loop tabs located on each side of the...
Reference: 6116568
Brand: Malossi
Malossi X K belt strap for maxi scooter 24x10.5x912 mm angle 30 Malossi code: 6116568 Malossi belt for KYMCO BET & WIN 250 4T LC. Malossi belt for KYMCO GRAND DINK 250 4T LC. Malossi belt for KYMCO KXR SPORT - MXU 250 4T LC. Malossi belt for KYMCO MAXXER 300 4T LC. Malossi belt for KYMCO YUP 250 4T LC (SH 50 D).
Reference: 585F 14 18NC
Brand: PBR
Perforated PBR sprocket for chain pitch 520, sprocket is made of steel. The PBR steel sprockets for 2 and 4T motorcycles combine high qualities of strength and durability with an optimal weight, lighter than the original models. This happens thanks to the construction in 18NCD5 tempered steel with high resistance treatment and lightening holes. This...
Reference: 01.OT.0325.L
Brand: Ohvale
Ohvale Holed screws kit 160 4s Code: 01.OT.0325.L
Reference: 6118942B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR MHR variator Malossi code: 6118942B
Reference: 6918702.o0
Brand: Malossi
Pair MALOSSI MHR FLUO ORANGE grips - model with side closure Malossi code: 6918702.o0 Technical features: Top quality material. Resistant to atmospheric agents, UV rays and ozone. Reinforced internal flange to support the hand and neutralize vibrations. Smooth external surface to ensure greater safety. The UP writing on the external part (side grip)...
Reference: 02 1346
Brand: Malossi
Malossi manifold 30 mm for Phbl 29-30. Malossi Code: 02 1346
Reference: 6118485
Brand: Malossi
Complete Malossi transmission group 6118485 Code: 6118485 Complete transmission group Malossi Over Range Mhr next Yamaha T Max 530 cc This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows to achieve truly unique performances! The torque driver (mobile pulley) has a larger diameter than the...
Reference: 01.OT.0260.L
Brand: Ohvale
Ohvale Gp-0 fairing wings kit painted matt black. Ohvale code: 01.OT.0260.L
Reference: 5211821
Brand: Malossi
Malossi automatic clutch adjustable for maxi delta clutch bell diameter 134 mm 5211821 Code: 5211821 Clutches with asbestos-free friction material and with patented adjustment system. MAXI DELTA CLUCTH allows you to obtain from 3 to 9 different adjustments by simply acting on three fixing screws and from 9 to 27 variations by replacing the calibration...
Reference: 3112370
Brand: Malossi
Malossi MHR TEAM cylinder diameter 39.88 in aluminum with pin diameter 12 H2O for modular head Malossi code: 3112370
Mhr team crankshaft with 13 conrod 90 pin and 44 mm stroke. Malossi code: 5317822.
IMPROVEMENTS SINCE THE PREVIOUS VERSION:
10% more inertial mass.
Reinforced connecting rod to withstand higher loads.
Sprocket-side crankshaft increased driveshaft cross-sectional area by 10% resulting in increased strength.
Increased oil seal, drive side, from shaft diameter 19mm to 20mm, increasing shaft strength.
TECHNICAL FEATURES:
Half shaft material: 18 Ni Cr Mo5.
Half shafts and forged monolithic rotating masses.
Machining on high precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper plated, coupled to shaft with high speed precision roller bearing.
N.B.: INTERVENTIONS ON THE CRANKCASE, BORING.
ONLY COMBINE WITH thermal units 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345).