Xmotorstore Payments
Malossi Force Master 2.1 5519448 electronic control unit
Code: 5519448
In addition to the marked improvement in the mapping, the effort of the Malossi technicians took the form of raising the rev limiter by 1,000 RPM depending on the vehicle, making the Force Master even more performing!
The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders.
Carburation adjustment
± 20% at min/average/max
Rev limiter : + 1000 RPM
Original 10,000 - Malossi 11,000
4 different mappings :
curve 0 : Malossi exhaust with db-killer, original cylinder, original head, original cam and original filter
curve 1 : original exhaust, Malossi cylinder, original head, original cam and original filter
curve 2 : Malossi exhaust with db-killer, Malossi cylinder, original head, original cam and original filter
curve 3 : original exhaust, original cylinder, original head, original cam and original filter
Malossi ECU for:
YAMAHA N MAX 125 ie 4T LC euro 3 <-2016 (E353E)
YAMAHA N MAX 125 ie 4T LC euro 4 2017->2020 (E3X7E)
Reference: 144.060.001
Brand: POLINI
Minimotard and minicross Polini water pump gasket
Reference: 67 9614
Brand: Malossi
Malossi HTQ secondary gears z 15 / 41 with toothed spline diameter 17 mm 67 9614 Malossi code: 67 9614. Transmission gears in special steel with straight teeth and recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide...
Reference: 001002SP1280
Brand: DM
Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.
Reference: 204.0839/C
Brand: POLINI
Peugeot Ludix piston 39.94 mm, selection C. Polini code: 204.0839/C
Reference: 51509AO
Brand: Arrow
Arrow muffler silencer for Aprilia RS4 125 from 2011 to 2016 51509AO (compatible with the original collectors). By installing the arrow exhaust on the original Aprilia manifolds, the following increases will be obtained: Power +2.00 HP Torque 1.18 Nm Weight -2.70 Kg Static noise +2 dB Terminal details: Aluminum body material Back case material stainless...
Reference: 1315597b
Brand: Malossi
Malossi bellows diameter 45.5x66x170 mm for PHBH 28-30 B VESPA carburetors Malossi code: 1315597b
Reference: 6718907
Brand: Malossi
Malossi gear wheel set for Vespa gearbox 6718907 Malossi code: 6718907 Gear wheel set z 57/42/38/35 for Vespa gearbox. Kit with Z different from the original useful for providing a variable transmission ratio based on needs. The wheels can also be purchased individually to customize the transmission ratios in the 4 gears: 1st gear wheel Z57 item 6718793B...
Reference: 204.0805/C
Brand: POLINI
Piston Mbk Booster 100cc 57,5 mm C selection. Polini code: 204.0805/C
Reference: 6215020BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215020BS Malossi brake pads for APRILIA SRV 850 ie 4T LC euro 3 (PIAGGIO M554M) Front NOT APPROVED The lack of approval does not limit their assembly Malossi brake pads for GILERA GP 800 4T LC (PIAGGIO M554M) Front APPROVED Malossi brake pads for GILERA NEXUS 500 ie 4T LC euro 2-3 Front APPROVED Malossi...
Reference: 5316308
Brand: Malossi
Complete Malossi connecting rod with 85 center distance and 12 diameter pin 5316308
Reference: 215.0462
Brand: POLINI
Polini intake manifolds for Minarelli AM6 and 21 carburettor. Polini code: 215.0462 Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors. The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box. The...
Reference: 11 9842
Brand: Malossi
Complete Malossi gasket kit for cylinder kit diameter 40 - 47 H2O Malossi code: 11 9842
Reference: 206.0158
Brand: POLINI
Polini segment diameter 47.8x2 mm Polini segment for: Piaggio, Piaggio Ape 50, Vespa, Vespa 50, Polini
Reference: F00 006
Brand: DM
Pair of rear wheel bearings with 114 mm spacer (HYDRAULIC BRAKES)
Reference: 112.104.00
Brand: GRC
Bearing kit plus spacer for hub Grc Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)
Reference: 176.1205/R
Brand: POLINI
Original Polini racing brake shoes (with springs) d.110X25 mm Code:176.1205/R Original Polini racing brake shoes (with springs) for CPI Hussar 50 2002. Original Polini racing brake shoes (with springs) for CPI Hussar 50 2003. Original Polini racing brake shoes (with springs) for CPI Hussar 50 from 2003->. Original Polini racing brake shoes (with...
Malossi Force Master 2.1 5519448 electronic control unit
Code: 5519448
In addition to the marked improvement in the mapping, the effort of the Malossi technicians took the form of raising the rev limiter by 1,000 RPM depending on the vehicle, making the Force Master even more performing!
The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders.
Carburation adjustment
± 20% at min/average/max
Rev limiter : + 1000 RPM
Original 10,000 - Malossi 11,000
4 different mappings :
curve 0 : Malossi exhaust with db-killer, original cylinder, original head, original cam and original filter
curve 1 : original exhaust, Malossi cylinder, original head, original cam and original filter
curve 2 : Malossi exhaust with db-killer, Malossi cylinder, original head, original cam and original filter
curve 3 : original exhaust, original cylinder, original head, original cam and original filter
