Xmotorstore Payments
Malossi Vespower ignition with 20 mm diameter cone
Malossi Code: 5516955
Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
Malossi ignition compatible with:
5516955 IGNITION VESPOWER MALOSSI CONE 20 VESPA ET3 PRIMAVERA 125 2T FLYWHEEL 1,2KG
Reference: 6615509B
Brand: Malossi
Malossi needle cage d.13x17x17.7 Malossi code: 6615509B
Reference: 6111598B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator for 4T 50 100 cc scooter Malossi code: 6111598B
Reference: 143.355.006
Brand: POLINI
Polini reverse water pump transmission belt. Transmission belt for Polini reverso engine water pump. The original Polini belt for the minimoto water pump. Code: 143.355.006
Reference: 03.IF.0065.L
Brand: Ohvale
Ohvale dust protection rear caliper Code: 03.IF.0065.L
Reference: 01.SB.0503.L
Brand: Ohvale
PIN 8×12×6.3 Ohvale 110 A Code: 01.SB.0503.L
Reference: 203.0134
Brand: POLINI
Piaggio Beverly 125cc air filter. Polini Code: 203.0134
Reference: 144.080.003
Brand: POLINI
Crankshaft for Polini and minicross minimotard, suitable for use with IDM flywheel. Code 144.080.003
Reference: 61 2765B
Brand: Malossi
Malossi fixed half-pulley d.106 for MBK Malossi code: 61 2765B
Reference: 5519425B
Brand: Malossi
Malossi Injtronic 5519425B electronic control unit Code: 5519425B Malossi Injtronic electronic control unit for original cylinder. The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy with hardware...
Reference: MC5SF
Brand: HJC
Hjc i20 Thorn helmet. The all-new HJC I20 has been designed to offer motorcyclists a different approach to the classic open face/half helmet. This street fighter inspired helmet features a removable goggle and WIDE VISION SUN VISORS WITH ANTI-FOG COATING (SMOKE AND CLEAR) that are manually operated with hook-and-loop tabs located on each side of the...
Reference: 204.0937/C
Brand: POLINI
Polini piston diameter 47.6 mm, selection C (47.565 mm) 204.0937/C Polini piston diameter 47,6 mm, for Yamaha, pin 10 mm for cross cylinder selection C (47,565 mm) Polini piston for: Aprilia, Aprilia Area 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50,...
Reference: 174.0108
Brand: POLINI
Suzuki brake pads 40.7x82.1x9.5 mm - 40.7x62x9.5 mm Code: 174.0108 Application: Suzuki, Suzuki Burgman / Skywawe 125/150 UH / 250, Suzuki Sixteen 125/150 K8
Reference: 271.0268
Brand: POLINI
Polini 4 valve head rocker pins. Polini Code: 271.0268 Polini rocker arm pins for: Polini, Polini XP4T 110
Reference: 1112058
Brand: Malossi
Complete Malossi gasket kit for cylinder diameter 57.5 for original head for Suzuki Address V 100 cc Malossi code: 1112058
Reference: 5219124
Brand: Malossi
Original Malossi clutch disc set for Piaggio 5219124 Malossi code: 5219124 Malossi clutch disc set for Piaggio Beverly and Mp3.
Malossi Vespower ignition with 20 mm diameter cone
Malossi Code: 5516955
Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
