Xmotorstore Payments
Malossi Vespower ignition with 19 mm diameter cone
Malossi Code: 5516952
Malossi Vespower ignition with 19 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
Malossi ignition compatible with:
5516952 IGNITION MALOSSI VESPA 50 SPECIAL WITH Ø 19 CONE AND 1.2 KG FLYWHEEL
5516952 IGNITION VESPOWER MALOSSI CONE 19 VESPA SPECIAL 50 FLYWHEEL 1,2KG
Reference: tcm-014002
Brand: Tecnominimoto
Bzm Tcm exhaust manifold. Exhaust manifold for minibikes, compatible with Bzm, Grc, Tcm mufflers. Standard version, with standard curve.
Reference: 204.0945/A
Brand: POLINI
Piston Yamaha 125cc 63mm 4t selection A. Polini code: 204.0945/A
Reference: 3218111.k0
Brand: Malossi
Malossi RX BLACK exhaust approved for Vespa GTS Malossi code: 3218111.k0 Malossi exhaust for Vespa GTS 125 ie 4T LC euro 4 2017 2020. Malossi exhaust for Vespa GTS Super 125 ie 4T LC euro 4 2017 2020.
Reference: 202.1415
Brand: POLINI
Secondary gear Vespa 125/150 4T E3 Z 16-42 Code: 202.1415 Forced engagement Application: Vespa, Vespa 125 4T GTS ie LC E3, Vespa 125 4T Primavera 3V ie, Vespa 150 4T Primavera 3V ie, Vespa 125 4T Sprint 3V ie, Vespa 150 4T GTS ie 3V Super, Vespa 150 4T Sprint 3V ie, Aprilia, Aprilia Sr 125 MAX 4T i E3
Reference: 209.0447
Brand: POLINI
Set of gaskets Peugeot Ludix 50cc 39,98mm 209.0447
Reference: 5114272
Brand: Malossi
Malossi Multivar variator 2000 5114272 Code: 5114272 Multivar 2000 When technology makes the difference. Multivar: the sports change with burning acceleration that does not give space! A jewel to be set in your scooter. Too bad that it cannot be exhibited, it is so perfect! Designed by highly experienced engineers, produced in full in the Malossi...
Reference: 215.0272
Brand: POLINI
Polini single-reed intake manifold for Ape 50cc. Polini code: 215.0272 PIAGGIO: APE 50 - APE 50 FL, FL2, FL3, RST MIX (6 Springs) Rubber sleeve diameter 36m length 31mm
Reference: 5518279B
Brand: Malossi
Malossi rotor and stator assembly for Vespa 5518279B engine Code: 5518279B Malossi rotor and stator assembly for Vespa engine, diameter 58 mm
Reference: 5517567
Brand: Malossi
Malossi Force Master 2 5517567 electronic control unit Code: 5517567 Malossi Force Master 2 electronic control unit for I - Tech 4 cylinders stroke In addition to the marked improvement in the mapping, the effort of the Malossi technicians took the form of raising the rev limiter by 800 RPM depending on the vehicle, making the Force Master even more...
Reference: 03.RP.0001.L
Brand: Ohvale
Complete rear rim Ohvale GP-2 03.RP.0001.L. Ohvale Code: 03.RP.0001.L. Rear rim complete with spacers and bearings for Ohvale Gp-2. Material: Aluminium. Rim color: Black. Dimensions: 3x12 Inches. ATTENTION: Disc not included.
Reference: EK415SH 110
Brand: EK (Enuma Chain)
EK 415SH chain 110 links for mopeds. Chain for small displacement motorcycles, chain pitch 415, 110 links, version EK415SH110.
Reference: 174.0018
Brand: POLINI
Original Polini brake pads 53.4x44x6x8.7 Code: 174.0018 Application: Suzuki, Suzuki Burgman / Skywawe 250/400 X, K3, K6, Sym, Sym Gts, RV 250, Sym Gts 125 Joymax (2006/2007), Sym Gts 125i EVO, Sym Joymax 125i 4T (LN) from 2015
Reference: Frizione-ust-2
Brand: GHR
Used minibike clutch Ghr. Clutch composed of: Ghr clay pigeon first series. Clutch weights Ghr. Red springs. Approximate diameter: 77 +- 0.5 mm.
Reference: 241.650
Brand: POLINI
Polini Variator for Hi speed Honda Sh 300 injection Code: 241.650 Variator supplied with a series of rollers 23X18 13 gr. Application: Honda, Honda Sh 300i / 300i E4, Honda Forza 300 ie 4T LC
Reference: 01.SD.0607.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x50Code: 01.SD.0607.L
Reference: 01.SZ.0610.L
Brand: Ohvale
Ohvale Left crankcase block Code: 01.SZ.0610.L
Malossi Vespower ignition with 19 mm diameter cone
Malossi Code: 5516952
Malossi Vespower ignition with 19 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
