Xmotorstore Payments
Malossi ignition with internal rotor Mhr Team II
Malossi Code: 5519633
Malossi ignition for Drr Drx 90 2016
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
-the first (MAPS) to determine the advance map selection
- the second (OFFSET) allows you to move the selected map + or - 2 °
- the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
1 for 4T variable advance engines
6 for 2T variable advance engines
1 with fixed advance
Other key components have also been revised such as the high voltage coil, now capable of delivering a maximum discharge voltage> 40KV for normal engine speeds from> 3000RPM and an extraordinary rise time @ 10bar> 1750 V / uS.
One of the most important innovations is the new rotor-stator unit, whose static component has been completely redesigned from a mechanical and electronic point of view!
Malossi ignition compatible with:
5519633 INTERNAL ROTOR IGNITION MALOSSI DRR DRX 90 2016-> MHR TEAM II
Reference: 251.0034
Brand: POLINI
Vespa 125 2t copper head gasket. Polini Code: 251.0034
Reference: 215.0309
Brand: POLINI
Flange for reed manifold Peugeot 17-19mm. Polini Code: 215.0309 Polini flange for Peugeot 103.
Reference: 29 7714
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 29 7714 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: MI208C01H
Brand: CAPIT
The Capit Mini tyrewarmers for minibikes, pitbikes and scooters are simple in shape but big in the task: versatile, very practical and efficient, the bestsellers in the world. Available in various sizes and colors can be ordered with European type plug (EU - 220/230 Volt) - English (UK - 230 Volt) - American (USA - 110 Volt) - Australian (AUS - 240 Volt)...
Reference: 206.0380
Brand: POLINI
Polini segment diameter 39.88 mm chromed Polini segment for: Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 SM, Gilera, Gilera SMT 50, Gilera RCR 50, Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Valenti racing, Valenti racing RME, Valenti racing SM For Cast Iron Cylinder
Reference: 190.0080
Brand: POLINI
Polini muffler for Peugeot Kisbee 50cc 4t euro 5. Polini code: 190.0080. A gritty look, completely in matt black painted steel: this is the Polini Motori exhaust system for Peugeot Kisbee 50 cc 4-stroke. The technical characteristics of the Polini muffler for Peugeot Kisbee are aimed at obtaining maximum performance and exploiting all the power of the...
Reference: 01.SZ.0411.L
Brand: Ohvale
Ohvale Set outer friction disk Code: 01.SZ.0411.L
Reference: 5519562
Brand: Malossi
Malossi Power ignition only for Peugeot mopeds 5519562 Malossi code: 5519562
Reference: 202.1429
Brand: POLINI
Polini Piaggio ZIP 50 4T EURO 4/5 Z=14-39 Primary Gear Code: 202.1429 Prepare your Piaggio Zip 50 4T 3V Euro 5 scooter for superior performance with the Polini gear kit. Designed to maximize speed and power, this kit offers a notable 60% increase in top speed, ensuring a more exciting and dynamic driving experience. Main features: 60% Increase in Maximum...
Reference: 210.0053
Brand: POLINI
Polini Motori dedicates all its experience to Enduro and Motard 50cc motorcycles by developing the brand new Polini For Race Crankshaft. Designed for Piaggio engines, Derbi (D50B since 2006) aims to improve the quality and performance of original spare parts. As in competition engines, it was born with the connecting rod machined from solid in order to...
Reference: 6280.82.40.06-0
Brand: Domino
Domino trial grips black 6280.82.40.06-0 Material: Thermoplastic rubber Black colour Length: 126-130 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 3 slots Flange diameter: 48 mm Handle diameter Knob mounted: 30 mm
Reference: A2103
Brand: Alfano
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Brand: BMC
KIT BMC CLEANING AIR FILTERS DETERGENT COMPLETE WASHING RACING WA250-500 The kit consists of the special BMC cleaner and an oil applicator (in spray or dispenser version).
Reference: 01.IF.0082.L
Brand: Ohvale
Formula Ohvale front right brake master cylinder cover. Ohvale code: 01.IF.0082.L The Formula brake pump reservoir cap kit includes: Cap, membrane and screws.
Reference: 01.SZ.0208.L
Brand: Ohvale
Ohvale Valve inner spring Code: 01.SZ.0208.L
Reference: 001002SP089A
Brand: DM
Minimoto fork plates pin Dm, for midi version. Dm code: 001002SP089A
Malossi ignition with internal rotor Mhr Team II
Malossi Code: 5519633
Malossi ignition for Drr Drx 90 2016
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
-the first (MAPS) to determine the advance map selection
- the second (OFFSET) allows you to move the selected map + or - 2 °
- the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
1 for 4T variable advance engines
6 for 2T variable advance engines
1 with fixed advance
Other key components have also been revised such as the high voltage coil, now capable of delivering a maximum discharge voltage> 40KV for normal engine speeds from> 3000RPM and an extraordinary rise time @ 10bar> 1750 V / uS.
One of the most important innovations is the new rotor-stator unit, whose static component has been completely redesigned from a mechanical and electronic point of view!
