Xmotorstore Payments
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Reference: FD-M023-00
Brand: Formula
Return spring pads Formula Universal for all minimoto Code: FD-M023-00
Reference: 2005
Brand: STAMAS
Pair of Stamas brake caliper support studs.
Reference: 01.SW.0117.L
Brand: Ohvale
Ohvale Bolt M6x105 Code: 01.SW.0117.L
Reference: 144.040.003
Brand: POLINI
Polini Xp4 110/125 2007 head gasket. Polini code: 144.040.003
Reference: 213.0602
Brand: POLINI
Carbon sheets 110X100mm thickness 0.40mm. Carbon plates to cut out for slats. Polini Code: 213.0602
Reference: 115.010.022
Brand: BZM
Gasket kit for Bzm 40cc 2t air engine. Gasket kit for Bzm minimoto engine, diameter 36 mm, 40cc, air-cooled. Bzm gaskets compatible with Bzm 420 and 620 engine crankcases. Diameter: 36 mm. Displacement: 40cc. Crankcase: 420 and 620. Cooling: AIR.
Reference: 03.OT.0007.L
Brand: Ohvale
Rear stand Ohvale Gp-0 and Gp.2. Rear stand for Ohvale, compatible with all versions. Ohvale Code: 03.OT.0007.L
Reference: 5519335
Brand: Malossi
Malossi Force master 3 electronic control unit for injection vehicles 5519335 Malossi code: 5519335 The scooter's original control unit normally interfaces with the lambda probe installed on the muffler to analyze the fuel content and adjust the carburetion accordingly. Force Master 3 intercepts the signal of the original probe, sending the values...
Reference: 5517518
Brand: Malossi
Malossi 5517518 flywheel and fan assembly Code: 5517518 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: IMH-04000
Brand: CS Racing
Cs racing muffler for 50cc racing minimoto. The Cs racing expansion improves performance at high and low revs.
Reference: 3212668
Brand: Malossi
Malossi SUPERMOTO MHR REPLICA approved exhaust Malossi code: 3212668 Malossi exhaust for APRILIA RX FACTORY 50 2T LC euro 4 2018 (D50B0). The lack of approval does not limit its assembly. Malossi exhaust for APRILIA SX 50 2T LC euro 4 2018 (D50B0). The lack of approval does not limit its assembly. Malossi exhaust for APRILIA SX FACTORY 50 2T LC euro 4...
Reference: 01.SB.0410.L
Brand: Ohvale
Ohvale Bolt M6x90 Code: 01.SB.0410.L
Reference: 3412946
Brand: Malossi
Piston 2T diameter 40 mm Malossi 3412946 Malossi code: 3412946. Piston 2T diameter 40 mm Malossi 3412946 with pin diameter 12 mm and 1 rectangular segment. Selection: 0/B/C/D Each selection step is equivalent to an increase of 0.01 mm.
Reference: 6114308
Brand: Malossi
Malossi Fixed pulley MHR aluminum Malossi code: 6114308 Malossi half-pulley for APRILIA MOJITO CUSTOM 50 2T, ONLY for OVER RANGE MHR ALUMINUM. Malossi half-pulley for APRILIA SR (carb.) 50 2T LC 2004-> (PIAGGIO), ONLY for OVER RANGE MHR ALUMINUM. Malossi half-pulley for APRILIA SR MOTARD 50 2T euro 2, ONLY for OVER RANGE MHR ALUMINUM. Malossi...
Reference: dist-ruota-dm-red
Brand: XRACING
Pair of front wheel spacers Dm red. Xmotorstore presents its new product specifically for DM minimoto: minimoto wheel spacers entirely machined from solid and anodized in red, particular attention has been paid to the external chamfers of the spacers, which allow easy assembly in tight spaces and for better sliding of the bearings. Technical...
Reference: 53 9212
Brand: Malossi
Malossi Rhq Mhr crankshaft 53 9212 Malossi code: 53 9212 Malossi Rhq Mhr crankshaft with 12 mm diameter pin, 85 mm connecting rod and 39.3 mm stroke. To be combined only with thermal unit 31 8881.
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
